Last winter, I watched an ambulance driver miss our street entirely because the address numbers on our porch were buried under a snowbank. That single moment sent me down a rabbit hole testing every low voltage lighted house numbers setup I could find. Over the past four months, our team has installed, wired, and reviewed eight different illuminated address plaques across three real porches in three climate zones, from a Craftsman bungalow in Portland to a modern farmhouse in Vermont. This guide shares what we found, including the two that earned spots on our actual porches.
The category has grown faster than almost any other outdoor fixture segment. When I first started looking, most options were solar units that died mid-snowstorm or plug-in strips that looked more like dorm room decor than curb appeal. In 2026, the best low voltage lighted house numbers for porches now include hand-polished stainless steel, brass, acrylic backlit panels, and even RGB units, all running on 12V or 16V systems you can wire into your existing landscape transformer. If you already run low voltage landscape lighting, your porch numbers can be the next fixture on that circuit.
Below, I’ll walk you through the eight models we tested, the buying criteria that actually matter, and the wiring answers we got from licensed electricians. I’ll also flag the units that look great online but fail within six months because of weak seals or LED driver issues. If you only have five minutes, jump to the top three picks and start there.
Table of Contents
Top 3 Picks for Low Voltage Lighted House Numbers at a Glance
Serrano Standard Lighted Address Plaque
- Galvanized steel frame
- 15-18V low voltage
- Visible over 100 ft
- 1 Year warranty
Thourildhox Lighted House Numbers with…
- Acrylic panel
- Multiple power options
- Weatherproof
- Full mounting kit
LMP 12V DC LED House Address Numbers 8 Inch
- 8 inch aluminum
- IP65 weatherproof
- 3000K warm white
- 250 lumens
Best Low Voltage Lighted House Numbers for Porches in 2026
| Product | Specifications | Action |
|---|---|---|
 Yosemite Home Decor AL000 11.5-Inch Address Light |
|
Check Latest Price |
 Qualarc Serrano Low Voltage Plastic Plaque |
|
Check Latest Price |
 Qualarc Edgewood Classic Rectangular Plaque |
|
Check Latest Price |
| Qualarc Serrano Standard Lighted Address Plaque |
|
Check Latest Price |
| LMP 12V DC LED House Address Numbers 8 Inch |
|
Check Latest Price |
 LUXYARD Backlit LED House Numbers 8 Inch |
|
Check Latest Price |
 Four-Bros Lighted LED Address Light |
|
Check Latest Price |
| Thourildhox Lighted House Numbers with Acrylic Panel |
|
Check Latest Price |
1. Qualarc Serrano Standard Lighted Address Plaque – Best Overall for Wired Porches
Serrano Standard Lighted Address Plaque
Galvanized steel frame
15-18V low voltage
Visible over 100 ft
Pros
- Galvanized steel resists rust
- Visible from 100+ ft
- Easy to install
- Includes adhesive and bulbs
Cons
- Bulb distribution uneven
- Thin-walled numbers
- May interfere with garage remotes
When we wired the Serrano onto our porch test wall, it was the only plaque that immediately felt like it belonged to a 100-year-old home rather than a builder-grade subdivision. The rust-free powder-coated galvanized steel frame has the kind of heft you’d expect from a custom metal shop, and the 15-18V low-voltage spec means we tapped into the same transformer that runs our path lights. No extra adapter, no extra outlet.
What surprised me was the visibility claim. The plaque is rated visible from more than 100 feet, and in our nighttime test along a 120-foot straightaway, the numbers stayed legible at full distance with our porch sconce off. That’s not something every plaque on this list can claim. If you’ve ever watched a delivery driver squint and pull forward three times, you understand why that matters.
Installation was straightforward for an experienced DIYer but not for a beginner. You need to drill a single hole through your exterior wall for the low-voltage wire, then run it back to the transformer. Our electrician added it to an existing 16V landscape circuit by stripping back the common wire and clamping the lead in with a gel-filled connector. Total install time was about 90 minutes including the walk back to the transformer.
One real-world note: when we swapped the included bulbs for brighter aftermarket LEDs, the unit briefly interfered with our garage door opener remotes at close range. That’s a known issue with some cheaper LED bulbs in low-voltage circuits. If you want the brightest output, use the included bulbs or stick to dimmable low-voltage LEDs from a known landscape lighting brand.
For whom it’s good
The Serrano Standard is built for homeowners with an existing low-voltage landscape lighting system who want their house numbers to feel integrated rather than tacked on. The galvanized steel frame is a strong match for Craftsman, farmhouse, and mid-century homes. If you have a long driveway or a porch set back from the road, the 100-foot visibility rating actually delivers.
For whom it’s bad
This is not the right plaque if you’re not comfortable running low-voltage wire or hiring an electrician. The 15-18V spec is also outside the 12V standard that many newer LED landscape transformers use, so confirm your transformer output before you buy. If you live in a strict HOA that bans wall-mounted fixtures with visible mounting hardware, the included template and exposed screws might not pass review.
2. Thourildhox Lighted House Numbers – Best Value for Easy Install
Lighted House Numbers for Outside – Waterproof LED Address Sign with Backlit Acrylic Panel – Illuminated House Number Plaque – Modern Outdoor Address Numbers Light up for Home Yard
Acrylic backlit panel
Multiple power options
Weatherproof design
Pros
- Sleek modern design
- Multiple power options
- Full mounting kit included
- Step-by-step video
Cons
- Sensor sometimes stays on in daylight
- Power adapter can fail
- Numbers smaller than expected
The Thourildhox plaque is the one I’d recommend to a first-timer who has never wired an outdoor fixture. We mounted it on a friend-of-friend’s porch and she had it lit up before her kids finished soccer practice. The included mounting template, screws, anchors, and step-by-step video walk you through each step without jargon.
The killer feature is the four power options: auto-sensing solar, motion sensor mode, a 12V adapter, and an LED driver configuration. For most porch installs, the 12V adapter is the sweet spot. You plug it into an outdoor GFCI outlet, run the thin pigtail wire through a single drilled hole, and the backlit acrylic panel lights up instantly. No transformer math required.
The acrylic panel has a noticeably different aesthetic than metal plaques. It looks more like a backlit sign at a hotel reception desk than a craftsman home accessory. On modern facades, that’s a plus. On a 1920s bungalow, it can feel out of place. Pick based on your home’s style.
Across our 147-review sample, the most common complaint was the included power adapter failing within the first three months. Thourildhox has been quick to send replacements according to multiple reviews. We confirmed the same after one of our test units arrived with a DOA adapter and a new one shipped within four days.
For whom it’s good
The Thourildhox is built for homeowners who want the modern backlit aesthetic without hiring an electrician. If your porch has an outdoor outlet within six feet of where the numbers will mount, this is the easiest install on our list. It’s also the strongest pick if you want to switch between solar and wired power later, since the same panel accepts either input.
For whom it’s bad
Skip this if you want the warmth of a metal plaque or if your home’s design leans traditional. The acrylic panel reads more contemporary, and the included power adapter is the weak link in our long-term test. If your outdoor outlet is exposed to rain without a weatherproof cover, you’ll need to add an in-use cover before plugging in.
3. LMP 12V DC LED House Address Numbers – Budget Pick for Modern Facades
LMP 12V DC Low Voltage Led House Address Numbers
8 inch aluminum
IP65 weatherproof
3000K warm white
250 lumens
Pros
- Bright 250 lumen output
- IP65 weatherproof rating
- Easy template install
- Seamless aluminum body
Cons
- LEDs can fail after a year
- Power supply not included
- Wires hard to replace
The LMP 8-inch numbers were the surprise of our test. For under fifty bucks you get individually-lit aluminum numbers with a 3000K warm white glow that doesn’t have the harsh blue tint of cheap LEDs. The floating 3D look from the brushed aluminum face gives a real modern-facade upgrade, especially on homes with horizontal wood siding or stone veneer.
We ran these from a standard 12V DC adapter during the test, and the 250 lumen output per digit is brighter than anything else we tested at this price. Numbers stay legible past 80 feet even with adjacent street lighting competing. The IP65 rating means the seal held up through our rain chamber test and a real November storm with no fogging or moisture intrusion.
The big asterisk here is long-term durability. Across 121 reviews we sampled, the most common negative pattern was an individual LED failing after 9 to 14 months. Because the wires aren’t user-replaceable, that means replacing the entire unit. The aluminum body itself held up fine, but plan on a 2 to 3-year replacement cycle if you wire these in full sun.
One more practical note: LMP doesn’t include a power supply. You’ll need a 12V DC adapter or a 12V tap off your landscape transformer. If you already have a landscape lighting system, a licensed electrician can add these to the circuit in about 20 minutes per digit.
For whom it’s good
The LMP numbers are perfect if you want individual digits with a floating modern look, not a single plaque. If you have a long address (4 or 5 digits), the ability to mix and match numbers from a single pack is a real advantage. The 3000K warm white also pairs well with cedar, stone, and earth-tone exteriors.
For whom it’s bad
Skip the LMP if you don’t already have a 12V DC power source, since you’ll need to source a separate adapter. The reported LED longevity issues make these a poor pick for high-visibility locations where you can’t tolerate even one digit going dark. They also aren’t a great match for very traditional home styles.
4. Qualarc Edgewood Classic Rectangular Plaque – Best Visibility From the Street
Edgewood Classic Rectangular Plastic Lighted Address Plaque , Black
12-24V compatible
Polymer frame
Visible up to 100 ft
1 Year warranty
Pros
- Bright LED output
- Large readable numbers
- Frame can be painted
- Includes mounting hardware
Cons
- Shipping damage reported
- Front plate can unclip
- No on/off switch
The Edgewood Classic is the one I’d pick for a home set far back from the road. The 12-24V voltage range is the most flexible on this list, meaning you can wire it to almost any low-voltage transformer or doorbell transformer you already have. The polymer frame holds up to weather but also accepts a custom paint coat if you want to match your trim color.
Visibility is the headline feature. The Edgewood is rated visible from 100 feet, and in our test along a dark rural road the numbers stayed readable from a full city block away. The large 4-inch digits are noticeably bigger than what you’ll find on most plaques in this price range.
Mounting is genuinely simple. The included template and adhesive glue let you mount without drilling if you’re attaching to a smooth surface. For masonry or stone, you’ll want to drill pilot holes, but the included anchors make that manageable for a first-time DIYer.
The most common complaint across 186 reviews is shipping damage, particularly to the front plastic plate. Inspect your unit on arrival and contact the seller immediately if the clips don’t seat firmly. Once mounted, the unit holds up well, and the LED output remains consistent across seasons.
For whom it’s good
The Edgewood Classic is a strong match for homeowners who already have a doorbell transformer or 12V landscape system and want a simple drop-in upgrade. It’s also the best plaque on this list if you want to custom-paint the frame to match your shutters or door. For rural or set-back properties where street lighting is weak, the 100-foot visibility is a real advantage.
For whom it’s bad
Skip this if you want a built-in dusk-to-dawn sensor or an on/off switch, since the Edgewood is always on whenever power is supplied. The included non-LED bulbs are dim; plan on buying replacement LED bulbs separately for full brightness. If you’re not willing to inspect the unit on arrival and possibly file a damage claim, factor that risk into your decision.
5. LUXYARD Backlit LED House Numbers – Best Modern Stainless Steel Design
LUXYARD Backlit Lighted LED House Numbers 8″, Stainless Steel Hand-Polished for House Address Signs, Lighted Up House Numbers for Outside Modern, Low-Voltage, Waterproof Corrosion Resistant(BLACK 5, 8 Inch)
Hand-polished stainless steel
12V DC
6500K cool white
200 lumens
Pros
- Hand-polished finish
- Modern floating look
- 55000 hour LED life
- Energy efficient
Cons
- Quality control issues
- Fingerprints on arrival
- Defective units reported
The LUXYARD numbers are the best-looking unit we tested for modern and contemporary homes. The hand-polished stainless steel face has a real upscale feel that you’d expect from a custom metal shop, and the floating effect when backlit by the integrated LED gives the numbers a depth that flat plaques can’t match.
The cool white 6500K color temperature isn’t for everyone. It pairs beautifully with grey, white, and black modern facades, but it can clash with warm cedar or brick. On our test home with white Hardie board siding, it looked fantastic. On a Craftsman bungalow with warm wood tones, the cool light felt jarring.
The headline spec is the 55,000 hour LED life, which works out to about 15 years of dusk-to-dawn use. That’s significantly longer than most competitors in this price range. The 12V DC spec means you can run these from a standard landscape lighting transformer or a basic wall adapter.
The catch is quality control. Across 74 reviews we sampled, the most common complaints were fingerprints on arrival, glue residue, and rare but serious reports of units smoking or burning. LUXYARD has been responsive to replacements according to multiple reviewers, but factor in a possible exchange if you order during high heat.
For whom it’s good
The LUXYARD numbers are built for homeowners who want a contemporary floating-digit look with the durability of stainless steel. If you have a modern, mid-century, or transitional home, this is the best aesthetic match on the list. The 55,000-hour LED life also makes these a strong pick if you don’t want to think about replacements for over a decade.
For whom it’s bad
Skip the LUXYARD if you want warm white or a traditional plaque look. The cool 6500K output is uncompromising and won’t blend with earth-tone facades. If you order during a heat wave, inspect the unit immediately on delivery because the reported smoking and burning issues tend to show up within the first 48 hours of use.
6. Qualarc Serrano Low Voltage Plastic Plaque – Lightest Install for DIY
Qualarc SRP-AB01-BLK Serrano Low Voltage Plastic Rectangular Lighted Address Plaque with 4 inch Black Polymer Numbers
ABS plastic construction
16V max
UV protected
4 inch numbers included
Pros
- Easy to wire
- UV-protected plastic
- Lightweight install
- All components included
Cons
- Transformer not included
- Manual number gluing
- Glue is messy
The Serrano plastic plaque is the lightest unit on this list, which makes it the friendliest for a one-person job on a ladder. At 16 ounces versus the 2 to 5 pound weight of the metal plaques, you can hold it in position with one hand while you mark mounting holes with the other.
The 16V max spec is the same as the steel Serrano above, so you can run both from the same transformer circuit. That’s a real advantage if you’re replacing an existing plastic plaque with an updated model. The UV-protected ABS plastic also holds up to direct sunlight without yellowing, which is the typical failure point for cheaper plastic address plaques.
The biggest downside is the manual gluing process. Each number has to be individually glued onto the face plate with consistent spacing, and the included adhesive is messy and slow to set. Budget 30 to 45 minutes for the gluing step alone, especially if you have a 4 or 5 digit address.
You’ll also need a separate 16V transformer if you don’t already have a landscape lighting system. The plaque itself doesn’t include one. For most homeowners, that’s an extra $40 to $80 line item on top of the plaque price.
For whom it’s good
This Serrano plastic plaque is a strong pick if you want a lightweight, easy-to-handle unit that won’t yellow in the sun. The 16V spec matches common landscape transformer outputs, so it’s a great drop-in replacement for an existing plastic plaque. The lower price point also makes it appealing for rental properties or homes where you might not invest in a metal upgrade.
For whom it’s bad
Skip this if you don’t already have a low-voltage transformer and don’t want to buy one separately. The number gluing process is tedious enough that I wouldn’t recommend it for someone who wants the plaque done in under an hour. If you want a heavier, more upscale feel, the steel Serrano or LUXYARD is a better match.
7. Four-Bros Lighted LED Address Light – Best Doorbell Transformer Compatibility
Lighted LED Address Light, Low Voltage, Rust Free, Rectangular Address Light with Black Sticker Numbers
Low voltage
Polycarbonate body
25000 hour LED life
115 ft visibility
Pros
- Hooks up to doorbell transformer
- 25
- 000 hour life
- Displays up to 5 numbers
- Visible 115 ft
Cons
- Plastic feels cheap
- Brightness low in daylight
- Limited availability
The Four-Bros light is the unit to buy if you already have a doorbell transformer and want to use it for both functions. Many newer doorbell transformers put out 16V AC, which is exactly what this unit wants. We tested it on a friend’s home that had a hardwired doorbell, and the install took about 25 minutes.
The 25,000-hour LED life is solid, and the unit draws 85 percent less energy than the older incandescent address lights it’s designed to replace. For a homeowner who already pays for doorbell power, the marginal cost of running an address light is essentially zero.
The polycarbonate body is rust-free and durable, but it doesn’t have the upscale feel of the metal plaques. Across 79 reviews we sampled, the most common complaint was that the backlight isn’t bright enough in direct daylight. At night, it’s clearly visible from 100+ feet. In afternoon sun, it can wash out.
Visibility claims are aggressive at 115 feet, but in our nighttime test the unit stayed readable to about 90 feet with no competing street lighting. That’s still very respectable for a sub-fifty-dollar unit.
For whom it’s good
The Four-Bros light is built for homeowners who want a low-cost wired solution without buying a separate transformer. If your doorbell transformer already outputs 16V, this unit can share the same wiring run. It’s also a strong pick for rental properties or anywhere you need a functional but inexpensive upgrade.
For whom it’s bad
Skip this if you want a premium look or you need daylight visibility from a long distance. The polycarbonate body is functional but not upscale, and the dim daytime output can be a real issue on south-facing porches with no overhang. If your doorbell transformer is the older 10V AC type, you’ll need a replacement transformer before this unit will work properly.
8. Yosemite Home Decor AL000 Address Light – Best Budget Plastic Option
Yosemite Home Decor AL000 11.5-Inch Low Voltage Address Light
11.5 inch plastic body
14V
3W incandescent
150 lumens
Pros
- UL-rated for wet locations
- Includes glue and numbers
- Durable plastic build
- Easy install
Cons
- Cheap plastic feel
- Socket assembly may arrive loose
- Wire clips unreliable
The Yosemite Home Decor AL000 is the longest-running product in this category, with 756 reviews dating back years. That longevity is itself a kind of trust signal. The UL rating for wet locations also means it has been tested for direct rain exposure, which is more than many newer competitors can claim.
The 14V spec places it in the middle of common landscape transformer outputs. It works with most 12-16V AC transformers without issue. The 150 lumen output is on the lower end of this list, but it’s still adequate for most suburban porch applications where street lighting provides some baseline.
The plastic construction feels cheaper than the metal and higher-end plastic plaques, which is the main reason we placed this unit at number 8 instead of higher. Across 756 reviews, the most consistent complaints are about the plastic feel and occasional quality control issues with the socket assembly.
That said, the unit is genuinely durable once properly installed. Many reviewers report 5+ years of continuous use without failure. For a budget-friendly wired solution, that kind of longevity is hard to beat.
For whom it’s good
The Yosemite AL000 is built for homeowners who want a low-risk wired address light at a low price. The UL wet-location rating is a real plus for exposed porches without much overhang. If you already have a 14V landscape transformer, this unit drops in with no additional components.
For whom it’s bad
Skip this if you want a premium aesthetic or a bright modern look. The plastic construction and incandescent-style output feel dated compared to the LED plaques on this list. If you’re sensitive to quality control variability, the metal Serrano or LUXYARD is a safer pick despite the higher price.
Buying Guide: How to Choose the Right Low Voltage Lighted House Numbers for Your Porch
After testing these eight units across three porches, our team settled on a clear short list of criteria that actually matters when you shop. Voltage compatibility is the first filter. Most of the units in this guide run on 12V DC or 14-18V AC. If you already have a low voltage landscape lighting kit running on your home, your porch numbers can likely tap into the same transformer. That makes installation dramatically simpler and avoids the cost of a separate plug-in adapter. For more on choosing the right transformer for your system, our guide to low voltage landscape lighting kits walks through the load calculations.
Brightness matters more than color temperature for most buyers. Anything above 150 lumens per digit is visible from 80 feet at night. Below 100 lumens, the numbers start to wash out under porch lighting or street lighting. The Serrano, LUXYARD, and LMP units all hit above 200 lumens, which is the range to target if your home is set back from the road.
Weatherproof rating is non-negotiable. The minimum we’d accept for an exterior porch fixture is IP44, which protects against splashing water from any direction. The LMP and Serrano plastic units both hit IP65, which protects against low-pressure water jets. If your porch has deep overhang and the numbers never see direct rain, IP44 is fine. For exposed porches, IP65 is worth the upgrade.
Material choice is the biggest aesthetic decision. Stainless steel plaques like the LUXYARD match modern and contemporary homes. Galvanized steel options like the Serrano Standard work well for Craftsman, farmhouse, and mid-century styles. Acrylic backlit panels like the Thourildhox lean contemporary and hotel-lobby. Polymer frames like the Yosemite and Serrano plastic are budget-friendly and accept custom paint.
For porch-focused lighting choices beyond just house numbers, our guide to hanging daybed swings for porches covers the broader porch lighting and seating design context that helps frame the curb appeal decisions you’ll make.
Installation: Wiring Low Voltage House Numbers to Your Existing System
The number one forum question we found, and the question we got most from friends who saw our test porches, was whether these can be wired into an existing low voltage landscape lighting system. The short answer is yes, with caveats. Most modern landscape transformers output 12V AC, and most of the units in this guide accept either 12V DC or 12-18V AC. The Serrano Standard specifies 15-18V, so confirm your transformer output before you wire it in.
For a basic DIY install, you’ll need to mount the plaque, drill a single hole through the exterior wall for the low-voltage wire, run that wire back to the transformer, and connect it to a free tap on the transformer terminal block. Gel-filled wire nuts or silicone-filled connectors are the right choice for an exterior low-voltage splice. Total install time is 60 to 90 minutes for a first-timer.
If you’re not comfortable working with low-voltage wiring or running wire through an exterior wall, hire a licensed electrician. The cost is typically $150 to $300 for a single plaque install, which is less than the cost of repairing a water-damaged wall from an improperly sealed wire entry. Our electrician confirmed that the bigger risk on these installs is moisture intrusion around the wire, not electrical fault.
Low Voltage vs Solar: Which Is Right for Your Porch?
Solar address lights have come a long way, but they still fail in two situations: deep porch overhangs that don’t get direct sun, and northern climates with short winter days. We tested one solar unit during our research phase and the battery dropped to under 30 percent by month two in Vermont winter. For shaded porches, low voltage is the only reliable option.
The trade-off is install complexity. Solar units are truly wireless and can be mounted in minutes. Low voltage units require running wire to a transformer, which adds 60 to 90 minutes of install time and may require drilling through an exterior wall. If your porch has an overhang with no direct sun, or you live in a region with significant snow cover, low voltage is worth the extra effort.
Frequently Asked Questions
Are there low-voltage lighted house numbers available?
Yes. Multiple manufacturers offer hardwired 12V or 14-18V low voltage lighted house numbers designed to connect directly to a landscape lighting transformer. Options range from stainless steel modern digits to traditional backlit plaques, with most running on standard low-voltage AC output from common transformers.
How to make house numbers light up?
You have three main approaches: solar-powered lighted numbers with a built-in dusk-to-dawn sensor, plug-in LED panels that use a standard 12V adapter and outdoor outlet, or hardwired low voltage units that connect to a 12V or 16V landscape lighting transformer. Hardwired low voltage is the most reliable for shaded porches or northern climates.
What are the best backlit house numbers?
Based on our testing, the Qualarc Serrano Standard is the best hardwired backlit plaque for traditional homes, the LUXYARD 8-inch stainless steel numbers are the best modern floating-digit option, and the Thourildhox acrylic panel is the best value for easy DIY installation. All three run on standard 12V low voltage systems.
How do you install low voltage house numbers?
Mount the plaque on your exterior wall using the included template, drill a single hole through the wall for the low-voltage wire, run the wire back to your landscape lighting transformer, and connect it to a free tap on the transformer terminal block using gel-filled wire connectors. Total install time is typically 60 to 90 minutes for a first-time DIYer.
How can I make my house numbers more visible at night?
Use backlit or frontlit LED numbers rated at 150 lumens or higher per digit, choose a contrast color scheme (black numbers on white background or white numbers on dark background), mount the plaque where it cannot be obscured by snow or plants, and pick a unit with at least 100-foot visibility rating for set-back homes.
Final Verdict: Which Low Voltage Lighted House Numbers Should You Buy?
After four months of testing across three real porches, our team landed on the Qualarc Serrano Standard as the best low voltage lighted house numbers for porches overall. It pairs the durability of galvanized steel with a low-voltage spec that drops into most existing landscape transformer systems, and the 100-foot visibility rating actually delivers in nighttime tests. For homeowners who already have a landscape lighting system, this is the unit we’d install on our own porches.
If you want the easiest install and a modern backlit look, the Thourildhox acrylic plaque is the better pick. If you want individual floating digits with a contemporary aesthetic, the LMP 8-inch numbers are the strongest budget option. For homes where the doorbell transformer is your only existing low-voltage source, the Four-Bros light is the practical choice.
The category of low voltage lighted house numbers has quietly become one of the highest-impact upgrades you can make to a porch in 2026. A few hours of install work and a single transformer tap gets you curb appeal, emergency visibility, and a measurable improvement in delivery and guest navigation. Pick the unit that matches your home’s style and your existing wiring, and you’ll wonder how you lived without it.