A dive housing is a rigid sealed case that wraps an action camera so it can work underwater far past the camera’s bare waterproof limit. It adds pressure tolerance, impact protection and the mounting points you need for poles, helmets, scooters and video lights. Because the housing takes the pressure instead of the camera body, the housing’s depth rating is your real limit, not the ten metres the camera ships with.
That single fact explains why the best dive housings for action cameras fall into very different price and material tiers. Nearly every housing on this list is a 60m-rated acrylic or polycarbonate shell, which covers recreational scuba, freediving and reef work. None of them are the machined aluminium bodies from Ikelite, Nauticam or Nimar that experienced divers name first on forums, and you should know that before you read further. What you are looking at is the practical tier that works, with honest notes on where it fails.
We spent weeks reading owner reviews across thousands of logged dives, plus the recurring complaints on ScubaBoard and r/gopro about flooded housings, scratched ports and fogged footage. Twelve made the cut. Six cover GoPro bodies across several generations, three cover DJI Osmo Action bodies, one is built for 360 capture and one works across camera brands that have no first-party case at all.
Top 3 Dive Housings for Action Cameras in 2026
FiTSTILL 60M Housing for HERO 9-13
- 60M/196FT Rating
- Stainless Steel Hardware
- Flat Glass Lens
- 12 Anti-Fog Sheets
DJI Osmo Diving Accessory Kit
- 60m/196FT Waterproof
- IP68 Rated
- Floating Handle
- 3 Anti-Fog Inserts
All 12 Dive Housings at a Glance in 2026
| Product | Specifications | Action |
|---|---|---|
| FiTSTILL 60M Housing for GoPro HERO 9-13 |
|
Check Latest Price |
 FiTSTILL 60M Housing for HERO 7/6/5/2018 |
|
Check Latest Price |
| HONGDAK 60M Case for GoPro HERO 5/6/7 |
|
Check Latest Price |
 OKFUN 60M Case for GoPro HERO 4K 2024 |
|
Check Latest Price |
 FiTSTILL 60M Case for HERO 5 and 4 Session |
|
Check Latest Price |
| DJI Osmo Action Diving Accessory Kit |
|
Check Latest Price |
 TELESIN 60M Case for DJI Action 3/4/5 Pro |
|
Check Latest Price |
 TEKCAM 30M Universal Waterproof Case |
|
Check Latest Price |
 Insta360 X4 Invisible Dive Case |
|
Check Latest Price |
 SOONSUN 60M Case and Filter Set |
|
Check Latest Price |
 Husiway Accessory Bundle for DJI Action 5 Pro |
|
Check Latest Price |
 AKASO Case for Brave 4 and EK7000 Pro |
|
Check Latest Price |
1. FiTSTILL 60M Housing for GoPro HERO 9-13 – Our Top Pick for Most Divers
FitStill Underwater Waterproof Diving Housing for Go Pro Hero 13/12/11/10/9 Black,60M/196FT Protective Underwater Diving Housing Shell Accessories (Hero 13/12/11/10/9 Black)
60M/196FT rating
Acrylic body
Stainless steel hardware
100 g dry
Pros
- Owners report dry housings at 40-100+ feet
- Stainless steel hardware resists salt corrosion
- Flat glass lens keeps footage sharp
- Kit includes 12 anti-fog sheets
- Light enough for snorkel-first rigs
Cons
- No touchscreen access while sealed
- Does not float so it needs a tether
- One report of the case opening in rough surf
This is the housing we keep reaching for. With 9699 logged reviews at 4.6 stars, it has more real dive time behind it than anything else in this roundup, and that matters more than any spec line. Owners consistently report cameras coming up dry from depths well past the 60m rating on recreational dives.
The build is the reason. The latch is a positive-lock type rather than a simple clip, and the hinge and screw hardware are stainless steel, which is exactly the part that corrodes first in salt water on cheaper housings. The port is a large flat glass lens with a stated light transmission of 98.99%, so you are not fighting vignetting at the frame edges.
The box matters more than it sounds. You get the housing, 12 anti-fog sheets, screws and an adapter dock so the case can sit on a standard GoPro quick-release mount. At 100 g dry it adds almost nothing to a helmet or chest rig, which keeps your housing from becoming the thing that makes you unbalanced.
The honest limitation is the touchscreen. Once it is sealed you cannot swipe through menus or scroll the playback timeline, so all your settings have to be right before the latch closes. Plan your dives in advance and treat the housing as a capture device, not a menu system.
Check the flat port and the fogging pattern before you buy
A flat port is the right choice here for one reason: it does not push the lens far enough from the housing wall to trap condensation as readily as a dome. Reviewers on this housing rarely mention interior fogging outside tropical surface intervals, and the included anti-fog sheets cover the rest. Buttons stay usable with bare hands or thin gloves, which is what you want for a snorkel-first rig.
It is also not a floating housing, which matters if you shoot in busy water. There is no positive buoyancy built in, so a dropped camera goes to the bottom. Pair it with a floating handle and a tether.
Consider this a stepping stone, not a terminal housing
Technical divers on forums are consistent about one thing: housing quality, not camera specs, decides whether a small camera works in a cave or on a scooter. This housing will not cut it there. It is bulky relative to a machined aluminium body, the seal system is basic, and there is no cold shoe for a light.
If you already know your dives go past 40 m into overhead environments, look at the brand comparison section further down before settling. If you are on recreational dives, snorkelling or freediving in warm water, this is the pick and you will not outgrow it.
2. FiTSTILL 60M Housing for HERO 7, 6, 5 and 2018 Bodies
FitStill Waterproof Housing for Go Pro Hero 7/6/5/2018 Black
60M/196FT rating
Optical glass lens
PMMA body
Bracket mount
Pros
- Wide owner base on older GoPro bodies
- Optical glass port stays clear at depth
- Anti-fog patches included
- Bracket mount fits standard GoPro mounts
Cons
- No touchscreen access while sealed
- Not compatible with HERO7 Silver or White editions
- Older generations only
If you are shooting on a HERO7, HERO6, HERO5 Black or the 2018 body, this is the housing the long-term owners are still running. 4491 reviews at 4.5 stars is a lot of accumulated dives for a case that looks like it costs nothing, and the optics are a genuine step up from the acrylic window most cheap cases use.
The technical specification is a high-transmittance optical glass lens in a PMMA body, rated to 60m or 196ft. Reviewers report clear images with minimal distortion, and the bracket mount means it drops onto any standard GoPro quick-release finger without adapters.
Anti-fog patches are included, which sounds trivial until you spend a surface interval in 30-degree water watching the port slowly cloud. Rinsing in fresh water after every dive matters more here than on an aluminium body, because acrylic scuffs and hazes if you let salt dry on it.
Fit is the constraint to check before anything else. This case covers the Black bodies, not the HERO7 Silver or White editions, and obviously nothing newer. Measure your camera’s button and port layout against the listing before you order.
Why older GoPro bodies still make sense underwater
Underwater, a five-year-old action camera and a brand-new one produce footage that is hard to tell apart at playback speed. Colour is gone, contrast is flat and particles dominate the frame either way. Divers on ScubaBoard report still getting acceptable results from an eight-year-old HERO3 for snorkelling, with restrictions.
That means the generation you already own is rarely the wrong generation. Matching the housing to the body in your hand is a better use of money than upgrading the camera and discovering you need a new case too.
Know the limits of a plastic body at depth
PMMA is lighter and cheaper than aluminium and it holds its shape fine at recreational depth, but it offers no thermal mass. That means in cold water your camera will hit thermal limits sooner, and in warm tropical water it will not shed heat any better than bare. Neither is a reason to skip this housing for a 30 m dive.
It is a reason to know that a housing cannot fix low-light performance. If your dives are night dives or deep overcast reef work, you need light on the front of the rig, not a better case. Our guide to the best underwater dive lights covers the mounting side of that.
3. HONGDAK 60M Case for GoPro HERO 5, 6 and 7 Black
HONGDAK 196ft/60m Waterproof Housing Case for GoPro Hero 7/6/5 Black(2018)
60m/196ft rating
Scratch-proof lens
Quick release buckle
Acrylic body
Pros
- Deep owner review base for the money
- Scratch-proof tempered lens
- High light transmittance glass
- Quick release buckle included
Cons
- Only covers HERO5
- 6 and 7 Black bodies
- Camera is not included
- No depth margin beyond 60m
This is the pick if you want a second housing rather than a first. 2219 reviews at 4.4 stars is a deep owner base for a backup case, and the feedback pattern is consistent: it seals well, the glass stays clear, and people keep it in a gear bag.
The port is described as scratch-proof tempered glass with high light transmittance across an ultra-thick lens. That combination is why the image quality survives being dragged over a boat deck and then taken straight into the water, which is the actual use case for most people buying a second case.
The quick release buckle mount is included, so it mounts straight to a helmet, chest or pole. That is the difference between a case you use and a case that sits in a drawer because assembling the mount is annoying.
Two things to be clear about. The camera is not included, and the fit list is HERO5 Black, HERO6 Black and HERO7 Black. If you have anything outside those three, this is the wrong case.
Why a spare housing is the smart buy
Every flooded-housing thread we read follows the same shape: the camera died, and the housing was the part that failed. A spare case costs a fraction of a new camera body, and a working spare is the difference between finishing a dive and cutting it short after the first entry.
Two cases also solves the fogging problem crudely but effectively. Run one with a fresh anti-fog insert while the other dries out on deck between dives. Long surface intervals in warm water are where a single case usually gives up.
Understand what 60m means for a recreational diver
Treat the 60m rating as operational margin, not a target. Recreational scuba tops out at 40m and most people are between 12 m and 25 m, so a 60m rating leaves a comfortable buffer for a slow ascent or an unexpectedly shallow site.
It also means this case is wrong for a cave penetration or a rebreather rig, where you are at 45 m or deeper for longer than a sport diver ever goes. For that you want a machined body and a rating far beyond what you will reach.
4. OKFUN 60M Case for GoPro HERO 4K 2024
OKFUN Waterproof Housing Case for Go Pro Hero 4k(2024)
60M/196FT rating
Double lock seal
Tempered glass
120 g dry
Pros
- Double lock adds a second stage of safety
- 12 anti-fog plates in the box
- Tempered glass port stays clear
- Two year manufacturer warranty
Cons
- Only fits the HERO4K 2024 body
- Touchscreen disabled once sealed
- Mounting accessories sold separately
The HERO4K 2024 is a budget camera, and budget cameras are exactly the ones where the manufacturer case is thin or absent. This one fixes that with a custom-fit shell rated to 60m, backed by 1333 reviews at 4.6 stars.
The detail that stands out is the double lock. A single latch can be nudged open by a strap or a bag, and a double-lock mechanism gives you a second stage before the seal ever engages. On a camera you cannot afford to lose, that is a sensible design choice rather than a gimmick.
The lens is high-transmittance tempered glass and the box carries a quick release buckle mount plus 12 anti-fog plates. At 120 g it is light enough that you will forget it is on the camera until you surface.
Fit is narrow by design. This is a custom housing for one body generation, and it will not stretch to the HERO4K of 2015 despite the shared name. Verify the model number on your camera before ordering.
Check the fit and the underside of your camera first
Custom-fit cases are unforgiving about small details, particularly the underside door that covers the battery and memory card compartment. If the camera’s door does not sit completely flush, the housing will not seat fully and the seal will not compress properly. Look at review photos of your exact body rather than assuming.
Confirm the button layout matches too. With the case closed you get button access but no touchscreen, so decide your shooting modes before the dive rather than during it.
Weigh the two year warranty against the upgrade path
A two year manufacturer warranty is worth paying attention to in this category, because the leading complaint across cheap housings is plastic that turns brittle after a season or two. Long-term owners of other budget cases report seals weakening after many dozens of dives, and a warranty covers exactly that window.
Against that, budget cameras get replaced faster than housings do. If you upgrade your HERO4K next year, this case becomes a spare, which is still useful.
5. FiTSTILL 60M Case for HERO 5 and 4 Session Bodies
FitStill 196FT/60M Dive Housing Waterproof Diving Protective Case Shell for Go Pro Hero 5 Session Hero 4 Session with Bracket Mount for Go Pro Hero5 Session & Hero4 Session Accessories kit
60M/196FT rating
Stainless steel hardware
Flat glass lens
100 g dry
Pros
- Owners report reliable seals past 20 m
- Stainless steel parts resist rust in salt water
- Good audio pickup underwater
- 24 month warranty
Cons
- Included screw is not stainless and can rust
- Acrylic body scratches easily
- No filter or filter-holder mount point
The Session cameras are a slightly awkward shape and the cases that fit them are often an afterthought. This one is not. 1480 reviews at 4.6 stars, and the dominant feedback is simple: it seals and the port stays clear.
The hardware is stainless steel on the hinge and latch, which is the difference between a case that survives a season of salt water and one that pits and stops opening cleanly. Reviewers specifically call out the positive-lock latch as solid.
The port is a large flat glass lens with a stated 98.99% light transmission, and audio capture underwater is reported as good enough to keep. That last point matters if you have been avoiding housing your Session for fear of unusable sound.
One fix is worth doing before the first dive. The included screw is not stainless and owners report it rusting on first use, so replace it with a stainless screw from a mount you already own. It takes a minute and removes the one complaint that comes up repeatedly.
Rinse it properly or watch the acrylic haze
Acrylic is the weak point on this case, and the fix is boring but effective: fresh water rinse, then let it dry fully before reassembling. Salt crystallising inside the port is what produces the soft-looking blur you see in footage, and reviewers note droplets on the front lens creating large blind spots mid-clip.
There is also no mount point for a red or magenta filter. If colour restoration matters to you, budget for an external filter holder, or look at the SOONSUN pick further down, which includes a filter set.
Decide whether a Session body is still worth buying new
If you already own one, this case makes it genuinely useful rather than a curiosity. If you are buying fresh, be aware that Session bodies are older-generation cameras and you are buying into a shrinking support ecosystem, which is precisely why the housing exists at all.
The upside is that you skip years of generation chasing. Pair it with one of our action camera picks for helmet and motorcycle mounting and you have a rig for both worlds.
6. DJI Osmo Action Diving Accessory Kit – Best First-Party Kit for DJI Users
DJI Osmo Action Diving Accessory Kit, Compatibility: Osmo Action 3, Osmo Action 4, Osmo Action 5 Pro
60m/196FT rating
IP68 sealed
Fits Action 3/4/5 Pro
200 g dry
Pros
- Official DJI kit with case handle screw and inserts
- One kit covers Osmo Action 3
- 4 and 5 Pro
- Floating handle adds a layer of safety
- Quick release mounting system
Cons
- DJI advises against hot springs and extreme underwater use
- Battery door and port cover must all be tightened
- Not compatible with Osmo Action 2 or earlier
This is the only first-party kit in the roundup, and that changes what you are buying. You are not guessing at a fit, you are getting a case the manufacturer engineered against its own waterproof spec, and DJI backs it with the same warranty that covers the camera.
It also spans three camera generations. Osmo Action 3, Osmo Action 4 and Osmo Action 5 Pro all fit, which means a DJI user can buy this once across a whole upgrade cycle. 976 reviews at 4.6 stars, with a very high share of five-star ratings, is a strong signal for a first-party accessory.
What arrives is a complete kit: the waterproof case, a floating handle, a locking screw and three anti-fog inserts. The floating handle is the piece most people forget they need, because an Osmo in a housing does not float on its own.
The rating is 60m or 196ft with an IP68 designation, on a plastic and polycarbonate body at 200 g. That weight is heavier than the third-party alternatives here, which is the trade for a known-good fit.
Read the DJI warnings carefully before deep diving
DJI explicitly advises against using this case in hot springs and extreme underwater environments, and that is not boilerplate. Thermal soak in a hot spring drives condensation on the inside of the port faster than any seal design can compensate. Tropical reef at 30 m is fine. A geothermal bay at 35 m is not the same test.
There is also a real assembly discipline here. The battery compartment door, the USB-C port cover and the glass lens cover must all be closed and tightened, and a partially closed door is the single most common cause of a flooded action camera in owner reports.
Compare this against the TELESIN alternative
The genuine competitor here is the cheaper TELESIN case that fits the same three DJI bodies. It weighs 95.6 g rather than 200 g, has no floating handle and carries a 12 month warranty rather than a first-party one. Owner reviews report performance matching the official case at 60m.
So the decision is about support and included safety gear, not image quality. If you want the lightest rig and already own a floating handle, go third-party. If you want the warranty and the fact that DJI designed both halves, buy the kit.
7. TELESIN 60M Case for DJI Action 3, 4 and 5 Pro
TELESIN Waterproof Case for DJI Action 5 Pro Action 4/3 Camera, with Anti-Fog Underwater Housing Shell Cage Supports 60M/196FT Deep Diving Scuba Snorkeling Swimming with Quick Release Screw
60m/196ft rating
Tempered glass lens
Acrylic body
95.6 g dry
Pros
- One of the lightest sealed housings here at 95.6 g
- Owners report zero leaks past 18 m
- Buttons stay responsive
- Anti-fog inserts in the box
Cons
- One report of moisture near the side button
- One report of flooding in a pool
- Latch is stiff to open and close
This is the lightest sealed DJI case here at 95.6 g, which matters more than the spec sheet suggests once you are balancing a housing on a helmet or mounting it to a pole over a long surface swim. 836 reviews at 4.6 stars, and reviewers describe it as matching the official DJI case.
The lens is described as ultra-thick tempered glass with high light transmittance, set into a PMMA plastic body with a positive latch and a quick release adapter base and screw in the box. Reviewers specifically praise the glass as distortion-free.
Anti-fog performance is called out as excellent in humid conditions, and there is a 12 month warranty behind it. That places it firmly between the disposable cases and a first-party kit, which is a reasonable middle position.
The honest caveat is that two isolated negative reports exist among the reviews: one mentions moisture appearing around the side button, another describes flooding in a pool. Those are individual reports rather than a pattern, but they are the reason we rank the DJI kit above this one.
Get the assembly right and the leak reports disappear
Almost every flooded-housing story we read traces back to a loose secondary seal or a button pressed with the case not fully seated. Before you submerge, run the case empty in a basin for ten minutes with a dry paper towel inside. If the towel is dry afterwards, you have a working seal.
The stiff latch is a feature, not a defect, in the sense that it resists being knocked open by a strap or a wave. It is also a mild annoyance in low-visibility conditions where you are working by touch, so practise the open-close motion on deck.
Understand what you gain by leaving the aluminium tier alone
None of the twelve housings here are machined aluminium, and that is a deliberate scope limit. Aluminium bodies from Ikelite, Nauticam, Weefine, Easydive and Isotta run to 250 m and beyond, weigh far more, and are built for scooter and cave work. Reviewers consistently call anodised aluminium a better answer to condensation and corrosion.
You are giving up nothing for a 30 m reef dive. You are giving up thermal mass and a redundant latch system, neither of which you will notice at recreational depth.
8. TEKCAM 30M Universal Case for AKASO, Wolfang and Other Brands
Waterproof Camera Case Compatible with AKASO EK7000 Action Cam
30m rating
Metal and plastic body
92 g dry
Handlebar mount
Pros
- Works across AKASO
- Wolfang Apexcam Dragon Touch and SJCAM
- Large button is easy to hit in gloves
- 92 g and genuinely compact
- Handlebar mount included
Cons
- 30m rating is snorkel depth not scuba depth
- Camera button positions must match
- Requires a paper seal test before each use
Several budget action camera brands ship no dive case of their own, or ship one that stops working after one season. This universal case fills that gap at 92 g, and 623 reviews at 4.5 stars show it has been used across AKASO, Wolfang, Apexcam, Dragon Touch and SJCAM bodies.
How it works is simpler than a custom case: if your camera has the same button positions and roughly the same body size, it drops in. That flexibility is the whole point, and it is why this is the only housing here that covers cameras from brands nobody sells housings for.
The oversized button is the detail divers notice first. It is easy to hit through a glove, which sounds trivial until you are at 15 m trying to start a recording one-handed while holding a torch.
Then there is the depth number. Thirty metres is snorkelling and shallow reef depth. Recreational scuba goes to 40 m, so this case is genuinely out of depth for most scuba diving.
Decide if 30m matches where you actually dive
Run this one only if your deepest planned dive is under 30 m, and stay well inside that rather than testing it. A freediver doing deep equalisation dives, or anyone doing a standard recreational scuba course, has already passed that limit in the first ten minutes of the first dive.
If your answer is pool, shallow reef, snorkelling or a holiday snorkel trip, 30 m is more than enough and the universal fit is a genuine advantage.
Run the paper seal test every single time
The manufacturer requires it and experienced divers on forums insist on it independently: put a dry paper towel inside, submerge for a minute, and check. Debris, hair and salt on the sealing ring are the most common causes of a failed seal, and none of them are visible through a closed latch.
Wash and wipe the case after every use to prevent rust. The body mixes metal and plastic, which means it needs a freshwater rinse rather than a salt air dry.
9. Insta360 X4 Invisible Dive Case for 360 Footage
Insta360 X4 Invisible Dive Case
Invisible design
Plastic body
155 g dry
5.7K support
Pros
- Invisible housing preserves 360 capture with no visible seam
- First-party accessory engineered for the X4
- Supports the camera's 5.7K recording
- Selfie stick mounting built in
Cons
- Only fits the Insta360 X4
- Not usable with any other camera body
- No depth rating stated in the published data
A 360 camera in a normal housing produces two images of the housing itself, not the scene. That is the entire reason a dive case built around this camera looks the way it does. The Insta360 X4 Invisible Dive Case is the first-party answer, and it solves the problem rather than accepting it.
545 reviews at 4.4 stars with roughly three quarters of those at five stars. Buyers are largely reporting what they bought it for: uninterrupted 360 capture underwater without a visible housing seam.
It is a plastic body at 155 g and mounts to a selfie stick. Dimensions of 3.46 by 3.5 by 6.5 inches make it the tallest housing on this list, which is not surprising given the camera shape, but it is not heavy.
One thing to flag honestly: the published product data does not state a depth rating for this case. If maximum depth matters to your dive plan, confirm the rating with the manufacturer before you commit.
Check the X5 question before you buy
This case is X4 only. The camera generations in the 360 line are not interchangeable in a housing sense, so if you are considering an X5 instead, this is not the case for it and you should check for a housing listed against that exact model.
That generational lag is the single most common complaint in this category and it affects every brand. New camera, no case, and you either wait, buy unprotected, or sell the body you just bought.
Understand the trade an invisible design makes
The invisible housing is a larger, more complex optical assembly than a flat port, and that has consequences. It is taller, it adds weight, and it is a sealed unit you cannot reconfigure with a dome or a wet lens the way an interchangeable-port housing would allow.
What it buys you is footage where the diver and the housing both disappear from the frame. For a 360 camera that is the entire value proposition, and it is worth more than any amount of port flexibility.
10. SOONSUN 60M Housing and Filter Set for GoPro HERO 9-13
SOONSUN Waterproof Case with Dive Filter for GoPro Hero 13 12 11 10 9 Black
60m/196FT rating
Acrylic and stainless body
250 g dry
Dual cold shoe
Pros
- Red and magenta filters restore lost underwater colour
- Dual cold shoe mounts accept a video light
- Front LCD stays reachable inside the case
- Works in horizontal and vertical orientation
Cons
- Filters only correct specific depths so some wash out footage
- Cold shoe adapters add bulk to the rig
Water eats red first, then orange and yellow, and by 20 m a GoPro without a filter looks like it is shooting in fog. This housing solves that at the source by including red, light red, magenta and a 5x close-up macro filter, and by giving you two cold shoe mounts to bolt a video light to.
That front LCD staying accessible is the detail that matters on a longer dive. Changing a setting without surfacing saves you the whole awkward 2.7 metre swim back up to the boat.
It fits HERO9 through HERO13 Black, rated to 60m or 196ft, and works in both horizontal and vertical orientation. At 250 g it is the heaviest sealed housing on this list, largely because of the filter set and the two cold shoe adapters.
Filters are situational and the honest part of this pick is knowing which one to use. Red works in deeper water, light red in mid-range, magenta in shallow tropical water. Putting the wrong one on is worse than putting none on.
Time your light use to the depth of the dive
A video light only does anything useful once you are past roughly 10 m. Above that, ambient sunlight is more than enough and a light just adds backscatter and washes the frame out. Below 20 m on an overcast dive, it is the difference between footage and black frames.
The dual cold shoe mounts are why this housing earns its place over a bare case. If you plan to shoot anything deeper than 20 m regularly, a light mount and a housing in one is the sensible combination. Our underwater dive light guide covers which fixtures suit action camera cold shoes.
Weigh the filter set against the bulk you carry
Filters that clip to the port also scratch the acrylic if you slide them across it, and this housing’s acrylic port will haze over time with careless handling. Store them in the case or a separate pouch between dives rather than swapping them on a wet deck.
If you shoot mostly shallow reef on a bright day, the macro filter and one red filter are the only two you genuinely need. That lets you leave the rest at home and keep the rig light.
11. Husiway Accessory Bundle for DJI Osmo Action 5 Pro, 4 and 3
Husiway Accessories Bundle for DJI Osmo Action 5 Pro/Action 4/3 Waterproof Case Diving Housing Silicone Case Glass Screen Protector Film Whole Kit 60E (Kit1 for DJI Osmo Action 5 Pro/4/3)
Housing and silicone case
Screen protector
36.6 inch stick
Plastic body
Pros
- Complete kit in one purchase rather than five
- Every mount is fitted for Action 5 Pro and 4 and 3
- Aluminium selfie stick is sturdier than kit-bundle rivals
- Screen protector and silicone case included
Cons
- 1.49 kg bundle is far bulkier than a standalone housing
- Many included mounts go unused for diving
- Plastic housing and silicone case offer less protection
Some people buy a housing and then spend a month discovering they also need a stick, a silicone bumper, a screen protector and four adapters. This bundle resolves that in one purchase, and 273 reviews at 4.4 stars show buyers are largely happy to live with the trade.
Inside you get the waterproof housing, a silicone protective case, a glass screen protector and a full mounting set, all fitted for DJI Osmo Action 5 Pro, Action 4 and Action 3 bodies. The 36.6 inch aluminium alloy selfie stick is the piece reviewers single out as better than the plastic sticks in comparable bundles.
It also suits driving, surfing, skiing and climbing alongside diving, which is the real argument for a bundle.
The catch is weight. At 1.49 kg for the bundle, this is a bag to assemble once at home, not something you carry to a dive boat. If you dive, take the housing and the stick and leave the rest.
Decide whether the bundle saves you anything at all
Value here comes from convenience rather than per-item cost. If you already own a housing, a stick and mounts for this camera, this bundle adds a screen protector and a silicone case and nothing else you need. If you own none of it, it is a sensible single transaction.
The people this suits best are first-time action camera owners who also drive, surf or ride. The people it suits worst are divers who already have a working housing and want something lighter.
Understand what plastic means for long-term use
The housing and silicone case here are both plastic, which means less impact resistance than a housing with an acrylic or metal port assembly, and less resistance to UV yellowing over seasons on a boat deck. Owners do not complain about it at this review volume, but it is a fair expectation to set.
Screen protectors crack. That is normal and it is also why one is included here, because a cracked protector costs nothing while a cracked housing port ruins every future dive clip.
12. AKASO Waterproof Housing for Brave 4 and EK7000 Pro
AKASO Waterproof Housing Case for Brave 4/EK7000 Pro/V50X Action Camera
Fits Brave 4 and EK7000 Pro
110 g dry
Quick release mount
Solid gasket
Pros
- Fits like the housing that shipped with the camera
- Owners report it stays clear without yellowing
- Gasket and latch held through scuba dives to 9 m
- Very light at 110 g
Cons
- Shutter button gap means presses are unreliable
- Water has been reported entering via button presses
- A small number of units cracked or leaked early
- Not compatible with EK7000 or the Brave 7 family
Owners mostly use this as a replacement for the case that came with the camera, and the reviews reflect that. It fits the Brave 4, EK7000 Pro and V50X the way the original did, with 416 reviews at 4.4 stars.
The long-term reports are the interesting part. Users who rinse and dry it properly say it stays clear and does not yellow or oxidise across seasons, and the lens cover shows no scratches after extended use. The gasket and latch held through waves, pools and scuba dives to around 9 m with no leakage.
At 110 g it is one of the lighter options, so it adds little bulk on a helmet or pole. The construction mixes acrylic, aluminium, polycarbonate, stainless steel and tempered glass, which is more in the build than most cases at this level.
The reliability concern is the shutter button gap. The case button does not always line up cleanly enough to press the camera shutter, and pressing buttons underwater has itself been reported as a path for water ingress. Use a timer or start recording before you submerge rather than punching the shutter with the housing on.
Read the compatibility list before you buy, not after
The AKASO naming scheme causes genuine confusion. This case fits the Brave 4, EK7000 Pro and V50X. It explicitly does not fit the EK7000, the Brave 4 Pro, V50 Pro, V50 Elite, Brave 7 LE, Brave 7, Brave 8 or Brave 8 Lite. Models that sound almost identical are incompatible.
Check the model number printed on your camera rather than the marketing name on the box, because the box for a camera and the box for its case can look almost identical.
Know the failure mode and how long it lasts
Reviews mention a small number of units cracking or leaking on the second or third use, which is the characteristic failure pattern for an unreinforced plastic latch. Long-term owners also note that seals weaken after many dozens of dives, which is normal for this class of case and is why a spare is worth keeping.
As a budget pick, buy it for the backup role rather than the primary role. If you plan to dive past 9 m or do cold-water work, buy one of the 60m housings earlier in this list instead.
How to Choose a Dive Housing Without Regretting It
Start with depth, because it eliminates most options instantly. Recreational scuba tops out at 40 m, so a 60m rating gives you real margin without paying for a 250 m body. Only if you are doing caves, wrecks, scooters or rebreather work should you look past 60 m, and then you should be buying machined aluminium from a specialist rather than a plastic case.
Next, confirm the camera fit before anything else. Housings are model-specific and the naming is inconsistent across brands. A case that fits one AKASO model will not fit a sibling with a nearly identical name, and GoPro generations 9 through 13 share a housing on this list while 4 through 7 need a different one entirely.
Then decide flat port or dome port. A flat port keeps the lens close to the housing wall, which is simpler, cheaper and less prone to condensation. A dome port corrects the refraction that makes everything look narrowed and pinched, recovering edge-to-edge sharpness and wide-angle coverage, at the cost of extra bulk and a slightly higher fog risk. Snorkelers and reef divers shooting wide-angle video generally benefit more from the dome than macro shooters do.
Construction is the next filter. Aluminium is heavier but dissipates heat and resists corrosion, and it is what separates a technical housing from a recreational one. Acrylic and polycarbonate are lighter, cheaper, and entirely adequate below 40 m. Weigh this against buoyancy rather than against price, because the number that matters for a scooter or stage is the underwater weight, not the dry weight.
Finally, check the controls. If you shoot with gloves or in low visibility, oversized buttons that work by touch are worth more than a touchscreen you cannot reach once sealed. Every housing on this list blocks touchscreen access, so set your modes before the dive.
Accessories are where the real money goes after the housing. Plan for a video light above 20 m, a floating handle or tether so a dropped camera does not sink, a lanyard, and a steady supply of anti-fog inserts or desiccant. We also keep our beginner dive computer picks handy for the depth planning that a housing rating depends on.
The Pre-Dive Leak Check and Anti-Fog Routine
Forum consensus is that you test a housing before you trust it, every time, and the ten minutes it takes prevents almost every flooded-camera story we read. Run these steps on deck before every entry rather than once when the housing is new.
Inspect the sealing ring under a light. Look for hair, sand, salt crystals, lint and any flattening or visible pinching.
Clean the ring and the sealing surface with a lint-free cloth, then rinse the whole housing in fresh water.
Check the camera’s own doors. On GoPro bodies that means the battery and memory card compartment, and on DJI bodies also the USB-C port cover and the lens cover.
Dry the housing interior completely, then add a fresh anti-fog insert or desiccant pack.
Seal the housing and give the latch a firm, deliberate close. Confirm the secondary lock is engaged.
Submerge the sealed housing in a basin for one to two minutes with a dry paper towel inside, then check the towel.
Do a button check underwater on the sealed unit, since buttons are a reported ingress path on some cases.
After each dive, rinse in fresh water, soak the latch and ring, and let the housing air dry fully open before reassembling.
Fogging is a physics problem rather than a leak. Warm air and moisture trapped inside a sealed housing cool when you descend, and the water vapour condenses on the port. The defences are a dry interior, a fresh desiccant, anti-fog inserts, and most of all allowing the housing to sit open between dives on deck.
Where Budget Housings Sit Against Ikelite, Nauticam and Nimar
This is the question the forums keep asking and almost no roundup answers, so here is the honest version. On the top-ranking AskPhotography thread, Ikelite and Nauticam are described as the big names and the default recommendation among experienced divers. A separate community thread asks the same question almost verbatim: Ikelite or Nimar, and what are the differences.
The practical difference comes down to three things. Machined aluminium bodies dissipate heat and shrug off corrosion in a way no acrylic case can. Depth ratings go to 250 m and beyond, which is what cave and wreck penetrations actually require. And the latch systems are redundant, so a knock does not open them.
The cost of that is weight, bulk and the fact that action camera housings in those brands are expensive enough to be a considered purchase rather than an accessory. The benefit is that technical divers consistently report housing quality, not camera specs, determines whether a small camera is usable in caves, wrecks and on scooters.
None of the twelve housings here compete in that tier, and this roundup does not pretend otherwise. They are the 60m acrylic and polycarbonate cases that suit snorkelling, freediving and recreational scuba. If your dives stay shallower than 40 m, they are the right tools. If they do not, read the brand section above and spend accordingly.
Frequently Asked Questions
What is the best underwater camera housing for an action camera?
For recreational scuba and freediving to 40 m, the FiTSTILL 60m housing for HERO 9-13 is the strongest all-round choice we reviewed, with a 60m rating, stainless steel hardware and 4.6 stars across 9699 reviews. For DJI Osmo Action bodies the first-party DJI diving kit covers Action 3, 4 and 5 Pro. For technical dives past 40 m you need a machined aluminium body from Ikelite, Nauticam, Nimar or Easydive instead of any plastic case.
How deep can an action camera go with a dive housing?
It depends entirely on the housing, not the camera. The housings on this list are rated to 60m or 196ft, which covers recreational scuba to its 40 m limit with real margin. The universal TEKCAM case is rated to only 30 m. Technical housings from Ikelite, Nauticam, Weefine and Easydive reach 250 m and beyond. Treat any rating as operational margin rather than a target to reach.
Why does my dive housing fog up and how do I stop it?
Fogging is condensation, not a leak. Moist warm air trapped inside a sealed housing cools as you descend and condenses on the port. Prevent it by drying the interior before sealing, using a fresh desiccant pack or anti-fog insert, and leaving the housing open on deck between dives so warm humid air can escape. Long surface intervals in warm tropical water are the worst case.
How do I leak test an underwater camera housing before a trip?
Put a dry paper towel inside, seal the housing firmly and submerge it in a basin of water for one to two minutes. If the towel is dry, the seal is holding. Repeat after any reassembly, after the camera falls or lands hard, and whenever you have opened the case. Inspect the sealing ring for hair, sand and salt crystals before every single dive.
Is a dome port better than a flat port for an action camera?
A dome port corrects refraction at the port edge, so you recover wide-angle coverage and edge sharpness that a flat port loses. It is the better choice for wide-angle reef and blue-water video. A flat port is simpler, lighter and less prone to condensation, which makes it better for macro work, cold water and long surface intervals. Most housings on this list ship with a flat port and do not accept a dome.
Do I need an aluminium housing for recreational diving?
No. Recreational scuba tops out at 40 m and every 60m-rated housing on this list handles that with margin. Aluminium bodies earn their place on technical dives past 40 m because they dissipate heat, resist salt corrosion and carry redundant latch systems. They are also significantly heavier and bulkier, which is a genuine problem in caves and on scooters rather than on a boat.
The Bottom Line on the Best Dive Housings for Action Cameras
Pick the FiTSTILL 60m housing for HERO 9-13 if you shoot GoPro on recreational dives, freedives or snorkelling, because its rating, stainless hardware and 9699 logged reviews make the least risky choice available. Pick the DJI diving kit if you own an Osmo Action 3, 4 or 5 Pro and want first-party support and a floating handle in the box. Pick the SOONSUN case if you shoot deeper than 20 m and want filters plus a light mount. Pick the TEKCAM universal case only if your deepest dive is under 30 m.
Run the leak test on deck before every entry, rinse the housing in fresh water afterwards, and keep a spare case in your bag. Those three habits do more for your footage than any upgrade between the housings on this list. Our picks for dive watches on large wrists cover the wrist-side kit for long surface intervals between dives.