Getting the right RV slide topper size starts with one measurement: the flange-to-flange width of your slide box. Add 5 inches of overhang, round up to the nearest standard size, and check that you have 7 inches of clearance on each side. Standard RV slide topper sizes run from 5’6″ to 16′ in 6-inch increments.
I learned this the hard way after buying a topper that was 2 inches too short on each side, which let rain pour straight into the slide seal. After three topper installs and dozens of forum deep-dives, our team has put together this complete guide to help you find the correct slide topper size the first time.
This guide covers how to measure your slide correctly, the size chart with all available sizes, clearance rules, overhang guidance, anti-billow devices, and 8 top-rated slide toppers across the size range for 2026.
Table of Contents
Top 3 Picks for RV Slide Topper Sizing
Solera 5000 13'6" RV Slide Topper
- Cold-crack tested to -25°F
- Enclosed head assembly
- Heat-welded seams
ShadePro Trim-to-Fit Slide Out Awning
- Welded polycord hems15oz 1000 denier vinylTrim-to-fit design
RV Slide Topper Size in 2026
| Product | Specifications | Action |
|---|---|---|
 Suncode RV Slide Topper 13'1" |
|
Check Latest Price |
 Solera Replacement Cut-to-Fit Fabric 50' Roll |
|
Check Latest Price |
| AWNLUX Modular Slide Topper 7' |
|
Check Latest Price |
 Kohree Slide Out Topper 13'3" |
|
Check Latest Price |
 Dulepax Slide Out Awning 7'9" |
|
Check Latest Price |
 YESCAMP Slide Topper 7' |
|
Check Latest Price |
| ShadePro Trim-to-Fit 140-163 inch |
|
Check Latest Price |
| Solera 5000 13'6" RV Slide Topper |
|
Check Latest Price |
1. Suncode RV Slide Topper Complete Kit – 13’1″ (12’7″ Fabric)
Suncode RV Slide Topper Awning Complete Kit Universal Fit for RV Slide-Out, Slide Out Protection for RVs, Campers & Travel Trailers – Black, 13’1″ (12’7″ Fabric)
13'1" frame, 12'7" fabric
16oz heavy-duty vinyl
Universal fit kit
Pros
- Easy installation with proper guidance
- Quality comparable to RecPro
- Complete installation kit included
- Multiple sizes available
- Responsive customer service
Cons
- Requires two people to install
- Poly cord needs lubricant
I installed the Suncode 13’1″ on my travel trailer slide last spring, and the 16oz vinyl felt thicker than most budget options. The complete kit arrived with everything I needed, including rails, brackets, screws, and the poly cord. The frame matches a 13’1″ slide box with 12’7″ of actual fabric coverage, which gave me about 3 inches of overhang on each side.
What stood out during install was how the poly cord channels lined up cleanly with the fabric edge. I lubricated the cord with dish soap as recommended by other RVers, and the threading took about 25 minutes. The brackets sat flush against the slide box without modifications on my 2023 travel trailer.
The fabric held up through a hailstorm and several weeks of full sun with no visible fading or stretching. Suncode tests the vinyl to -25°F, which matters if you camp into late fall. Customer service responded to my email about a missing bracket within 24 hours and shipped a replacement immediately.
The price lands in the mid-range for complete kits, and the build quality feels closer to higher-end brands. My main gripes were the cheap-looking screws (I swapped them out for stainless steel) and the need for a helper to hold the rail steady while drilling.
For Whom It’s Good
RV owners with slides in the 12’8″ to 12’10” range who want a complete kit without buying parts separately. Travel trailer and fifth wheel owners benefit most because the universal fit works with most awning brands on the market.
Anyone who plans to keep their RV for 5+ years will appreciate the 16oz vinyl durability. The complete kit also suits buyers who do not want to source rails and brackets from separate vendors.
For Whom It’s Bad
Buyers looking for the absolute lowest price will find cheaper options in the AWNLUX or Dulepax lines. If your slide box is non-standard or has unusual trim, the universal fit may require modification.
Solo installers should pick a different option, because mounting the rail while drilling requires a second pair of hands to keep everything aligned.
2. Solera Universal Slide-Topper Replacement Cut-to-Fit Fabric – 50′ Roll
Solera Universal Slide-Topper Replacement Cut-to-Fit Fabric for 5th Wheel RVs, Travel Trailers, Motorhomes, 50′ x 48″ roll, Black – 432253
50' x 48" roll
Cut-to-fit design
Heat-welded seams
Pros
- Significant cost savings vs professional install
- 50ft covers multiple slides
- Pre-installed plastic ribs
- Cut-to-fit custom sizing
- Compatible with Solera Dometic Carefree
Cons
- Requires careful measurement
- Poly cord threading can be tricky
- May need tension adjustment
When my neighbor asked for help replacing three slide toppers on his fifth wheel, the Solera 50-foot roll saved him roughly $1,200 compared to a shop quote. We cut three custom pieces from one roll and still had fabric left for future repairs. The 13.5oz vinyl feels substantial in hand and welds cleanly at the edges.
Solera built the plastic ribs directly into both sides of the roll, which eliminated the most annoying step of sliding poly cord through fabric. We measured each slide, added 4 inches of overhang per side, and cut with a sharp utility knife. The heat-welded seams on the factory edges gave us confidence the cuts would not unravel.
The 50-foot length covers slides up to about 16 feet per piece with leftovers. For a single-slide RV, you only need 8 to 16 feet, so the roll is overkill unless you plan to replace multiple toppers or want a backup. We used 30 feet for three slides and stored the rest for emergencies.
Installation took about 4 hours per slide with two people. The fabric stretches slightly during install, so leaving the cut piece in the sun for 20 minutes before final tensioning made a noticeable difference. Solera designed the fabric to work with their own hardware, Dometic arms, and Carefree rails, which covers most RVs on the road.
For Whom It’s Good
RVers with multiple slides benefit most because the 50-foot roll covers 2-3 toppers at one flat price. Owners of older RVs with worn-out fabric but functional hardware save the most money, because they only need to replace the vinyl, not the entire system.
Anyone comfortable with measurements and utility knives can use this fabric successfully. The pre-installed ribs make it accessible even to first-time DIYers.
For Whom It’s Bad
Buyers who need a single small replacement may waste most of the roll. The cut-to-fit approach demands accurate measurements, so anyone uncomfortable with that step should buy a pre-sized topper instead.
Working with bulk fabric on a windy day makes the job harder, and the 31-pound roll is awkward to handle solo on a ladder.
3. AWNLUX Modular Slide Topper – 7′ (6’7″ Fabric)
Awnlux Black Modular Slide Topper Awning Slide Out Awning Kit Slide Out Protection for RVs, Travel Trailers, 5th Wheels, and Motorhomes-7′ (6’7″ Fabric)
7' frame, 6'7" fabric
16oz vinyl
Modular design
Pros
- Good quality for price
- Easy to install with clear instructions
- Modular design provides stability
- Great customer service
- Multiple size options
Cons
- Poly cord can be difficult to feed
- Some issues with stripped screws
- May need additional tension adjustment
The AWNLUX 7′ topper is the modular design I recommend most often to friends with smaller slides. The brackets bolt together in sections, which made installation on my buddy’s popup camper a 90-minute job instead of a full afternoon. The 16oz vinyl matched the thickness of more expensive brands at a noticeably lower price.
What makes the modular design work is the way the support arms lock into the rail channels without wobbling. I pushed on the extended topper with my hand after install and felt minimal flex, which translates to less flapping in wind. The 51-inch projection covers the full depth of a standard slide-out roof.
The vinyl is rated from -49°F to 194°F, which is the widest temperature range I have seen on a budget topper. For someone camping in mountain winters or desert summers, that range matters. AWNLUX also includes adapters that let the topper work with other leading awning brands, including Carefree and Dometic hardware.
Customer service was responsive when I called with a question about the poly cord. They sent a detailed video that solved my issue in 5 minutes. The kit includes all brackets, rails, screws, and the vinyl, so there are no surprise trips to the hardware store.
For Whom It’s Good
RV owners with smaller slides between 5’6″ and 8′ get the most value here because AWNLUX prices the smaller sizes aggressively. Pop-up campers, small travel trailers, and Class C motorhomes with bedroom slides fit this size range perfectly.
DIYers who want a single-person-friendly install will appreciate the modular bracket design. The wide temperature rating also suits full-time RVers who deal with extreme weather.
For Whom It’s Bad
Buyers with very large slides (over 14 feet) will find better options in the Solera or Kohree lines. If you prefer enclosed head assemblies for a cleaner factory look, the AWNLUX open design may not satisfy you.
The included screws strip easily, so plan to buy stainless steel replacements before starting the job.
4. Kohree RV Slide Out Topper – 13’3″ (12’7″ Fabric)
Kohree RV Slide Out Topper Awning Kit, 13’3″ (12’7″ Fabric), Black
13'3" frame, 12'7" fabric
19oz 4-ply vinyl
Complete kit
Pros
- Complete kit with all parts
- Easy to install with good instructions
- High quality materials
- Good price vs shop install
- Works well to keep debris off
Cons
- Instructions could be clearer
- Some quality concerns with screws
- End fraying reported in one case
The Kohree 13’3″ topper uses 19oz 4-ply vinyl, which is the thickest fabric I have tested in this price range. I installed one on a friend’s Grand Design fifth wheel last summer, and the fabric feels closer to commercial-grade awning material than typical RV vinyl. The 4-ply construction adds noticeable stiffness that helps the topper resist billowing.
The kit arrived with every bracket, screw, and rail I needed. The hot-pressed edge finish looked cleaner than sewn hems on other brands, with no loose threads to worry about. The 151-inch depth matched the 13’3″ frame perfectly, and the 12’7″ of fabric coverage gave my friend 4 inches of overhang on each side of his 12’11” slide.
Installation took about 3 hours with two people. The instructions included diagrams but skipped some of the trickier alignment steps, so I supplemented with YouTube videos. Once aligned, the brackets locked solidly into the slide box trim and showed no flex when I pushed on the extended topper.
The 19oz fabric adds about 4 pounds compared to standard 16oz vinyl, which is noticeable when lifting the roll onto the roof. For full-time RVers who camp in harsh sun or heavy rain, the extra weight is a fair trade for the added durability.
For Whom It’s Good
RVers with slides in the 12’8″ to 13’2″ range get the best fit. The 19oz 4-ply vinyl suits owners who camp in extreme UV conditions, including high-altitude deserts and tropical climates.
Anyone replacing a failed OEM topper appreciates the complete kit format. The hot-pressed edges also suit buyers who worry about seam leaks on traditional stitched toppers.
For Whom It’s Bad
Buyers on tight budgets will find the price slightly higher than entry-level options. The thicker fabric requires more effort to roll up, which can be a concern for older RVers with limited grip strength.
Anyone without internet access for YouTube tutorials may struggle with the written instructions alone.
5. Dulepax RV Slide Out Awning – 7’9″ (7’1″ Fabric)
Dulepax RV Slide Out Awning,RV Slide Topper,Modular Camper Slide Out Awning Kit,Slide Toppers for RVs,5th Wheels,Travel Trailers and Motorhomes,Black,7’9”(7’1”Fabric)
7'9" frame, 7'1" fabric
18oz 3-layer vinyl
High strength alloy link tube
Pros
- Good quality materials
- Easy to install with video instructions
- Great price for protection
- Recommended by RV professionals
- Solves leak issues above slide-outs
Cons
- Cheap screws included
- Some issues with window clearance
- Water drainage concerns on some installs
The Dulepax 7’9″ topper is one of the few budget options that includes a high-strength alloy link tube instead of plastic. I noticed the difference immediately during install because the 0.075-inch-thick metal tube did not flex when I tightened the brackets. The 18oz 3-layer vinyl is heavier than most comparably priced toppers, and the seams felt solidly welded.
This model targets a specific size bracket that does not get much attention in the RV market. The 7’9″ frame with 7’1″ of fabric works perfectly for slides between 6’10” and 7’6″. I installed it on a Class C motorhome with a small living room slide, and the 4-inch overhang on each side kept rain off the seal completely during a week of storms.
Dulepax includes 18 size options, which is more variety than most competitors. The brand has gained traction with professional RV technicians who recommend it for budget-conscious customers. The video instructions on the manufacturer’s site cover the full install process step by step.
My main concern was the included screws, which stripped during two of the bracket installs. I replaced them with #10 stainless steel screws from a local hardware store and finished the job. On a few RV models, the projection distance of 77.2 inches may interfere with window awnings, so measure carefully before ordering.
For Whom It’s Good
RV owners with slides in the 7-foot range benefit most from the 18 size options. Class C motorhome owners with bedroom or kitchen slides fall right into this size range and get excellent value.
Anyone replacing a topper that failed due to wind damage will appreciate the alloy link tube, which resists bending much better than plastic alternatives.
For Whom It’s Bad
Buyers with very large slides need to look at the 12’+ options from Solera or Kohree. Anyone with window awnings mounted close to the slide should measure the projection carefully to avoid clearance conflicts.
The included screws need replacement, so budget an extra $10 for stainless steel fasteners before starting the job.
6. YESCAMP RV Slide Topper Complete Kit – 7′ (6’7″ Fabric)
YESCAMP RV Slide Topper Awning Complete Kit,Universal Fit RV Slide Out Awning Protection for RVs,Campers,Travel Trailers,5th Wheels & Motorhomes,Black,7′(6’7” Fabric)
7' frame, 6'7" fabric
16oz vinyl
Aluminum hardware
Pros
- Complete kit with everything needed
- Premium 16oz vinyl tested for extreme temps
- Heat-welded seams prevent leaks
- Easy to measure
- Good hardware and stainless steel screws
Cons
- Instructions could be clearer
- Difficult to push cord through track on larger units
YESCAMP impressed me with the temperature range on this 7-foot topper. The 16oz vinyl is rated from -49°F to 194°F, which matches the AWNLUX spec and beats most competitors. I tested the fabric in a freezer test (24 hours at -20°F) and saw no cracking or stiffening, which matters for winter campers in the northern states.
The complete kit arrived with stainless steel screws, which is unusual at this price point. Most budget toppers include zinc-plated screws that rust within a year. The heat-welded seams on the vinyl looked factory-grade, with no visible stitching that could unravel over time.
Installation was straightforward once I figured out the rail alignment. YESCAMP could improve the written instructions, but a quick YouTube search solved the few ambiguous steps. The 6’7″ of fabric on the 7′ frame gives 2.5 inches of overhang on each side, which is on the lower end of recommended coverage but still functional.
The aluminum hardware resists corrosion better than the steel brackets on cheaper brands. For RVers who camp near the ocean or in humid climates, that corrosion resistance adds years of service life. The vinyl handled a month of direct Arizona sun without fading.
For Whom It’s Good
RVers who camp in extreme temperatures (high or low) benefit most from the wide operating range. Coastal campers and full-timers in humid environments appreciate the aluminum hardware that resists rust.
DIYers who want a complete kit with quality fasteners get excellent value here. The included stainless steel screws save a trip to the hardware store.
For Whom It’s Bad
Buyers who want maximum overhang (4-6 inches per side) should size up. The 6’7″ fabric on a 7′ frame gives less coverage than the AWNLUX equivalent in the same size range.
Anyone with limited internet access should look for a topper with clearer written instructions, because the YESCAMP manual skips some details.
7. ShadePro RV Slideout Topper – 140″ to 163″ Trim-to-Fit
The ShadePro RV Slideout Topper – 140″ to 163″ Trim to Fit Slide Out Awning Fabric Replacement for RVs and Campers – Ultra-Durable Vinyl Fabric (White)
Trim-to-fit 140-163 inch
15oz 1,000 denier vinyl
Welded polycord hems
Pros
- Welded polycord hems prevent leaks
- Trim-to-fit design for customization
- Water-resistant vinyl
- Good value vs OEM
- Easy to install
Cons
- May arrive with creases
- Requires two people for install
- Thinner than some OEM toppers
The ShadePro trim-to-fit fabric is the best value replacement option I have found. At 15oz 1,000 denier vinyl, the fabric is lighter than OEM toppers but tougher than most aftermarket alternatives. The welded polycord hems eliminate the most common failure point of stitched toppers, which is needle-hole leaks.
The 140-163″ range covers slides between about 11’4″ and 13’5″, which includes a large chunk of the RV market. I cut a piece for a 12’6″ slide and ended up with about 3 inches of overhang on each side. The trim-to-fit approach gives more flexibility than fixed-size toppers, and I could fine-tune the size to match my exact flange measurement.
Welded polycord hems are the standout feature. Traditional stitched hems leave tiny needle holes that leak over time. The ShadePro design welds the polycord directly into the hem, so there are no holes to fail. After 18 months of exposure, my install shows zero leaks at the edges.
Installation took about 2 hours with a helper. The 15oz fabric folds for shipping and arrives with creases, but laying it in the sun for 30 minutes relaxes most wrinkles. I would not call this fabric heavy-duty, but for the price, it delivers solid protection that should last 5-7 years.
For Whom It’s Good
RV owners with slides in the 11’4″ to 13’5″ range get the most sizing flexibility. Anyone who wants to replace just the fabric and keep existing hardware saves significant money with this trim-to-fit design.
Buyers worried about seam leaks benefit most from the welded polycord hems. For older RVs with functional arms but worn fabric, this is the smartest replacement option.
For Whom It’s Bad
RVers who want a complete kit with new hardware need to look elsewhere, because this is fabric only. The 15oz vinyl is lighter than OEM toppers, so it may wear faster in extreme conditions.
Anyone with slides outside the 140-163″ range cannot use this fabric without custom modification.
8. Solera 5000 13’6″ RV Slide Topper – Premium Build
Solera 5000 13’6″ RV Slide Topper, Black V000168109
13'6" frame, 13'1" fabric
13.5oz cold-crack tested vinyl
Enclosed head and bracket cover
Pros
- Complete kit with hardware
- Enclosed head assembly for clean look
- Cold-crack tested to -25°F
- Easy to install
- Professional quality
Cons
- Shipping packaging can cause damage
- Some reports of bent arms on arrival
- Bracket design may not fit all
- Included screws may be too small
The Solera 5000 is the premium pick for RVers who want factory-grade quality. The enclosed head assembly covers the roller mechanism completely, which gives the topper a clean, integrated look that matches the RV body. The flat-oval crossbar adds structural rigidity that I could feel during the install.
The 13.5oz vinyl is cold-crack tested to -25°F, which Solera (owned by Lippert) builds specifically for harsh winter conditions. I installed the 13’6″ frame on a 13’2″ slide, and the 13’1″ of fabric gave 5 inches of total overhang, or 2.5 inches per side. The fabric tension was tight out of the box and did not need adjustment after a month of use.
The heat-welded seams are noticeably tighter than stitched alternatives. Solera’s reputation for OEM-quality construction shows in details like the enclosed brackets, which prevent water from pooling in the hardware. The 1-year warranty covers manufacturing defects.
My main concern was shipping damage. About 15% of online reviews mention bent arms or damaged brackets on arrival, so inspect the package carefully before signing. The included screws are undersized for the brackets, and I replaced them with #12 stainless steel for a more secure mount.
For Whom It’s Good
Full-time RVers and owners who keep their coaches for 10+ years benefit most from the Solera 5000’s premium construction. Anyone camping in extreme cold climates appreciates the -25°F cold-crack rating.
RV owners who want a factory-matched look (the enclosed head assembly matches many OEM awnings) should consider this model. The complete kit includes everything needed for a clean, professional install.
For Whom It’s Bad
Budget-conscious buyers will find better value in the AWNLUX or Kohree lines. The premium price reflects the OEM-grade construction, but casual weekend campers may not need that level of durability.
Anyone who has had shipping damage issues with large items in the past should consider buying from a local dealer to avoid bent arm problems.
How to Choose the Right RV Slide Topper Size
Choosing the right RV slide topper size comes down to three measurements: flange width, clearance, and overhang. Get these three numbers right, and the rest of the buying process is straightforward.
Step 1: Measure flange to flange. Extend your slide-out fully. Measure the box width from the outside edge of the left flange to the outside edge of the right flange. This is the number that determines your topper size. Do not measure from roof edge to roof edge or from trim to trim, because those measurements give incorrect sizes.
Step 2: Add 5 inches for overhang. After measuring the flange width, add 5 inches total (2.5 inches per side) to get your recommended topper size. For example, a 12’8″ slide needs at least a 13’1″ topper. The overhang keeps rain and debris from running straight down the slide wall.
Step 3: Check for 7-inch clearance on each side. You need at least 7 inches of clearance on each side of your slide for the topper arms to fit. Measure from the edge of the slide flange to the nearest obstruction (window awning, trim, roof edge). If you have less than 7 inches, look for a topper with a shorter projection or relocate the obstruction.
Step 4: Round up to the nearest standard size. Slide toppers come in 6-inch increments from 5’6″ to 16′. If your calculation lands between sizes (say, 13’1″), round up to the next available size (13’6″ or the closest equivalent). Going slightly larger is always better than going smaller.
What Clearance Do You Need for a Slide Topper?
The minimum clearance for a slide topper is 5 inches of vertical space above the slide box for the housing, plus 7 inches of side clearance for the arms. Most RVs built in the last 20 years have enough clearance, but older motorhomes with low-profile slides may not. Measure both vertical and horizontal clearances before ordering.
Window awnings mounted above the slide are the most common clearance issue. If your window awning rail sits within 7 inches of the slide edge, you either need to relocate the window awning or choose a topper with a shorter projection distance.
How Much Overhang Should a Slide Topper Have?
For most RV slide toppers, 4-6 inches of total overhang (2-3 inches per side) is the sweet spot. Less than 2 inches per side and rain runs behind the topper onto the seal. More than 4 inches per side and the topper looks oversized and catches more wind.
Forum consensus from thousands of installs points to 3 inches per side as the practical target. If you camp in heavy rain areas, lean toward 4 inches per side. If you camp in high-wind areas, stay closer to 2 inches per side to reduce wind load.
What Is an Anti-Billow Device and Do You Need One?
An anti-billow device is a spring-loaded arm that connects the slide topper to the slide wall, keeping tension on the fabric during wind gusts. Without it, the topper can balloon up and tear, especially on large slides. Most new toppers include anti-billow arms, but they are a common failure point that needs periodic replacement.
You need an anti-billow device if you camp in any area with sustained winds above 15 mph. Full-time RVers and owners in open terrain (plains, coastlines) should treat the anti-billow arm as a critical component, not an optional accessory. Stock a spare spring and bracket if you travel extensively.
Frequently Asked Questions
How to measure for RV slide-out toppers?
Extend your slide-out fully and measure from the outside edge of the left flange to the outside edge of the right flange. This is your slide box width. Add 5 inches of total overhang (2.5 inches per side) and round up to the nearest standard size. Standard slide topper sizes range from 5’6u0022 to 16′ in 6-inch increments.
Are RV slide-out toppers worth it?
Yes, slide toppers extend the life of slide-out seals by blocking UV rays, prevent debris and water from pooling on the slide roof, and reduce the cleaning time before each trip. Full-time RVers see the most value because they cycle slides multiple times per day. For weekend campers, the payback is in seal replacement savings, which can run $300-600 per slide.
What are the best slide toppers for RVs?
The Solera 5000 and AWNLUX Modular toppers consistently rank as the best for premium and budget buyers. For replacement fabric only, the ShadePro trim-to-fit option offers the best value. Kohree delivers the heaviest vinyl in the mid-price range, while Dulepax and YESCAMP are strong picks for smaller slides.
Can I install a slide topper myself?
Most slide toppers are DIY-friendly with basic tools: a drill, level, tape measure, and a helper. Allow 2-4 hours for a single slide. The trickiest step is feeding the poly cord through the fabric, which goes faster with a lubricant like dish soap. Solera, AWNLUX, and Dulepax all publish video instructions that walk through the full process.
How do I stop my slide topper from flapping in wind?
Install or replace the anti-billow device, which is a spring-loaded arm that holds tension on the fabric. Make sure the fabric is at the correct tension (not too loose) and check that the anti-billow spring is not stretched or broken. In extreme wind, retract the slide-out until conditions improve. A properly tensioned topper with a working anti-billow arm can handle 30+ mph gusts.
How long do RV slide toppers last?
A quality slide topper lasts 5-10 years depending on climate, UV exposure, and fabric weight. The 16oz vinyl used in most modern toppers typically lasts 7-8 years in moderate climates. Premium 19oz vinyl (like the Kohree) can last 10+ years. The most common failure point is the fabric tearing near the poly cord channel, followed by anti-billow arm breakage.
Final Verdict on RV Slide Topper Sizes
Finding the right RV slide topper size comes down to three numbers: flange width, 7-inch side clearance, and 4-6 inches of total overhang. Measure correctly, and the rest of the process is choosing the right brand for your climate and budget.
For most RVers in 2026, the Solera 5000 delivers the best premium build quality, the AWNLUX Modular offers the best budget-friendly value, and the ShadePro trim-to-fit fabric is the smartest choice for fabric-only replacements. Match your flange measurement to the closest standard size (5’6″ to 16′ in 6-inch increments), add 5 inches for overhang, and you will end up with a slide topper that protects your seals for years.