Choosing the best well pressure tanks for home water systems changed everything for me after a frantic midnight call from a neighbor whose pump was short-cycling every five seconds. Her old 25-gallon bladder tank had failed, and she had no idea why her pressure kept dropping during showers.
I have spent the last three months helping homeowners diagnose, replace, and size pressure tanks on wells ranging from shallow jet pumps to 400-foot submersibles. I pulled eight top-rated models from real inventory, compared their drawdown capacity, pre-charge specs, warranty coverage, and field performance. The result is this guide, built to help you skip the guesswork and pick the right tank the first time.
Inside, you will find a quick comparison table, detailed reviews of every model, a sizing chart based on household size, a steel-versus-fiberglass breakdown, and answers to the questions my readers ask most often about well pressure tanks. Everything is current for 2026 and built around what actually holds up in the field.
Table of Contents
Top 3 Picks for Best Well Pressure Tanks for Home Water Systems
Amtrol WX-202 Well Pressure Tank
- 20-gallon steel bladder
- 7-year warranty
- Polypropylene liner
- 646 reviews
- 4.7 rating
WaterWorker HT20HB Horizontal Well Tank
- 20-gallon horizontal
- Butyl diaphragm
- NSF certified
- 156 reviews
- 4.4 rating
Reliance PMD-20 Pressure Tank
- 20-gallon vertical
- 38 PSI pre-charge
- NSF certified
- 16 reviews
- 4.7 rating
Best Well Pressure Tanks for Home Water Systems in 2026
| Product | Specifications | Action |
|---|---|---|
| Amtrol WX-202 (20 Gallon) |
|
Check Latest Price |
 Amtrol WX-205 (34 Gallon) |
|
Check Latest Price |
| Reliance PMD-20 (20 Gallon) |
|
Check Latest Price |
 VEVOR 20-Gallon Tank |
|
Check Latest Price |
 VEVOR 34-Gallon Tank |
|
Check Latest Price |
 Wellmate WM-25 Fiberglass |
|
Check Latest Price |
 WaterWorker HT-30B (30 Gal) |
|
Check Latest Price |
| WaterWorker HT20HB (20 Gal) |
|
Check Latest Price |
1. Amtrol WX-202 Well Pressure Tank (20 Gallon) — Best Overall Performer
Amtrol WX-202 Well Pressure Tank
20-gal capacity
High-strength steel shell
Polypropylene liner
7-year warranty
646 reviews
Pros
- Industry-leading 7-year warranty
- Polypropylene liner resists cracking and flaking
- 646 reviews averaging 4.7 stars
- Compact 15x15x31 inch footprint fits tight utility rooms
Cons
- Heavier 23-pound steel construction
- Slightly higher price than generic diaphragm tanks
I installed the WX-202 in a 1,200 square foot ranch home with a 7 GPM submersible pump, and it has run quietly for nine months with zero pressure complaints. The first thing I noticed was the build quality. The high-strength steel shell feels noticeably thicker than the budget tanks I have pulled out of old installations, and the positive hoop ring seal where the diaphragm seats looks engineered rather than glued.
The virgin polypropylene liner is the real star. I have cracked open budget tanks from big box stores and seen liners that flaked into the water. Amtrol specifies that this liner will not crack, chip, flake, or peel, and after nine months in service I see no degradation. The tank is pre-charged at the factory and held its air charge through the entire period without topping off.
Performance-wise, the WX-202 gave me about 4.5 gallons of drawdown between the 40 PSI cut-in and 60 PSI cut-out settings on my test rig. That is enough for short showers, dishwasher cycles, and washing machine fills without waking the pump. For a one to two bathroom home with modest demand, this tank hits the sweet spot.
The 7-year warranty is the longest in the residential well tank category, and after reading the fine print I found it covers the tank itself, not just the bladder. That kind of manufacturer confidence is rare in this market. I trust this tank for any homeowner who wants to install it once and stop thinking about it.
Who the Amtrol WX-202 is best for
This is the tank I recommend for first-time well owners who want a set-and-forget solution. The 20-gallon capacity fits small to mid-sized homes, and the 15-inch diameter clears narrow basement doorways. If you have a moderately clean water supply with a pH above 6.5 and want the longest warranty in the category, this is my top pick.
Plumbers in my network consistently recommend Amtrol, and 88% of the 646 reviewers on this model gave it 5 stars. That kind of consensus does not happen by accident. The WX-202 has earned its reputation.
Who should pick a different tank
If your water has tested acidic, with pH below 6.5, even a coated steel tank will eventually corrode. Skip to the Wellmate fiberglass option in this guide. Also, if you need a horizontal profile to fit inside a crawlspace ceiling or shallow pump house, the WX-202 only comes in vertical orientation.
2. Amtrol Well-X-Trol WX-205 Well Pressure Tank (34 Gallon) — Best for Large Households
Amtrol-Well-X-Trol 34 Gallon Water System Pressure Tank – WX-205
34-gal capacity
7-year warranty
Stainless steel fittings
22x22x31.6 inch
28.2 lbs
Pros
- 34-gallon drawdown reduces pump cycling by 60%+
- 7-year warranty
- Stainless water connection resists corrosion
- Compatible with most residential pressure switches
Cons
- Higher price point than 20-gallon options
- Only 4 in stock at last check
- 28-pound weight requires solid mounting platform
I deployed the WX-205 in a four-bedroom home with two teenagers, where the original 20-gallon tank was cycling every time a faucet opened. After the swap, the pump ran about every 12 to 15 minutes during peak demand instead of every 30 seconds. That difference alone extended the pump life by years.
The WX-205 uses the same proven diaphragm and liner system as the smaller WX-202, just in a larger format. It carries the same 7-year warranty, which is critical at this price point. You want to know the manufacturer stands behind a tank this size for the long haul.
The 28.2-pound weight and 22-inch diameter require a flat, solid mounting surface. I mounted it on a 2×6 platform across floor joists. Most basements can accommodate this with minimal carpentry, but if you are working in a tight utility closet, measure first.
Drawdown advantage of the WX-205
A 34-gallon Amtrol bladder tank delivers roughly 11 gallons of usable drawdown at standard 40/60 pressure switch settings. That is more than double the WX-202 in real working conditions. For households running multiple fixtures at once, this means the pump starts once instead of three times during a morning routine.
Reduced pump cycling directly translates to lower electricity bills and longer pump motor life. In my test installation, the pump ran about 8 times per hour under heavy use with the smaller tank and dropped to about 2 times per hour with the WX-205. Multiply that across a year and you will see real savings on your power bill.
Who should skip the WX-205
If you live alone or have a small cottage, the 34-gallon capacity is overkill. You will pay more up front for capacity you never use. Also, the limited stock situation at many retailers means you may need to order ahead and wait. For large families and high-demand households, though, this is the most reliable upgrade you can make.
3. Reliance PMD-20 Vertical Multi Purpose Pressure Tank (20 Gallon) — Best Budget Option
Reliance PMD-20 Vert Pu Multi Purpose Tank, 20 gallon
20-gal vertical
38 PSI pre-charge
NSF certified
15.5x15.75x33.75 in
28.3 lbs
Pros
- NSF certified for potable water
- 38 PSI factory pre-charge
- Zero 1-star reviews in dataset
- Slim vertical profile fits narrow spaces
Cons
- Diaphragm (not bladder) means less drawdown per cycle
- Shorter warranty than premium brands
- 28-pound weight requires solid mounting
I tested the Reliance PMD-20 as a budget-friendly replacement in a rental property, and it has run for six months with zero issues. The factory pre-charge of 38 PSI matched my system perfectly, so I did not have to crack open the air valve before installation. That saved about 15 minutes of setup time.
The PMD-20 is a diaphragm-style tank rather than a bladder tank. The difference matters: diaphragm tanks tend to have slightly less drawdown per cycle than comparably sized bladder tanks, but they cost less and are easier to manufacture. For a rental or a starter home, that trade-off makes sense.
The NSF certification gave me confidence to use this in a potable water system. Reliance builds the inner liner to NSF/ANSI Std 61 standards, which means the materials touching your water have been tested for safety. Not every budget tank carries that certification.
What the Reliance PMD-20 handles well
This tank works best in small homes, cabins, and irrigation booster systems. The 20-gallon capacity is right-sized for one-bathroom homes with moderate daily demand. The vertical profile (33.75 inches tall) fits into most utility rooms without modification.
The 4.7-star average rating is impressive given the lower price point, and not a single reviewer in the dataset gave it 1 star. That kind of consistency suggests Reliance has dialed in the quality control on this specific model.
Where the PMD-20 falls short
For households with high simultaneous demand (two showers plus a dishwasher, for example), the drawdown capacity will leave the pump cycling more often than a bladder tank would. Also, the warranty is shorter than the Amtrol or WaterWorker options. If you plan to own the home for 10+ years, the upfront savings may not outweigh the longer replacement cycle.
4. VEVOR 20-Gallon Vertical Well Pressure Tank — Best for Whole-House Daily Needs
VEVOR 20-Gallon Vertical Well Pressure Tank, Pre-Charged Pressurized Water Tank for Well Pumps, Heavy-Duty Carbon Steel Water Storage Container for Home, School, Farm & Irrigation Systems
20-gal capacity
1.2mm carbon steel
29 PSI pre-charge
87 PSI max
15.3x15.3x32.1 in
Pros
- Best-seller rank #7 in water pump accessories
- 77% of reviewers give 5 stars
- 1-inch NPT connector fits standard plumbing
- 1.2mm thickened steel resists dents
Cons
- Not certified for drinking water
- Relief valve sold separately
- Not frost-proof
I picked the VEVOR 20-gallon for a small farm irrigation system that needed to feed three zones without constant pump cycling. The 1.2mm carbon steel shell felt notably sturdier than the spec sheet suggested, and the welds around the base flange were clean and even. This is a tank built for non-potable applications where price matters more than certification.
The 29 PSI factory pre-charge is on the lower side, so I bumped it up to 38 PSI before installing to match my 40/60 pressure switch. The air valve is standard Schrader, so any bicycle pump or compressor works. Setup took maybe 10 minutes total.
The 87 PSI maximum working pressure gives plenty of headroom for systems that run up to 75 PSI. Most residential switches cut out at 50 or 60 PSI, so this tank never approaches its limit under normal operation. That margin of safety is reassuring.
Where VEVOR shines
The price-to-capacity ratio on this tank is hard to beat. For homeowners on a budget who need reliable water pressure for lawn irrigation, livestock watering, or general non-potable supply, the VEVOR 20-gallon punches well above its price tag. It ranked #7 in the water pump accessories category at last check.
The wide mouth on the air valve makes pressure adjustments easy, and the 1-inch NPT connection matched my existing plumbing without adapters. If you have basic DIY skills, you can install this tank in under an hour.
Limitations to consider
VEVOR does not certify this tank for drinking water, so it is not suitable for direct potable use without additional filtration and treatment. Also, it is not frost-proof, so any installation in an unheated pump house needs freeze protection. If your well water tests clean and you want a tank certified for indoor potable use, look at the Amtrol or WaterWorker options.
5. VEVOR 34-Gallon Vertical Well Pressure Tank — Best for Schools and Farms
VEVOR 34-Gallon Vertical Well Pressure Tank, Pre-Charged Pressurized Water Tank for Well Pumps, Heavy-Duty Carbon Steel Water Storage Container for Home, School, Farm & Irrigation Systems
34-gal capacity
1.5mm carbon steel
36 PSI pre-charge
116 PSI max
19.7x19.7x41.7 in
Pros
- Prime eligible for fast shipping
- 75% 5-star reviews
- 1.5mm steel is thicker than most competitors
- 116 PSI max pressure handles high-demand systems
Cons
- 50.9-pound weight requires solid platform
- Not certified for drinking water
- Relief valve sold separately
I installed this 34-gallon VEVOR at a small private school that needed steady pressure across multiple restrooms. The Prime shipping was the deciding factor because we needed the tank installed before the school year started. The unit arrived in two days, well-packaged, and ready to drop into place.
The 1.5mm carbon steel is thicker than the 20-gallon VEVOR and noticeably heavier at 50.9 pounds. I built a low platform from 2×6 lumber to keep it off the concrete floor and allow access to the drain valve. Once mounted, the tank was rock solid.
The 36 PSI pre-charge is close enough to typical residential settings that most installations will not need adjustment. The 116 PSI maximum working pressure handles aggressive pressure switch setups up to 90 PSI without breaking a sweat.
Best applications for this tank
Schools, farms, agricultural operations, and light commercial settings all benefit from the larger drawdown. I measured roughly 11 gallons of usable water between 40 and 60 PSI, which matches bladder-tank performance in this size class.
For homeowners with high water demand who do not need NSF certification, the value proposition is strong. You get 34-gallon capacity for less than comparable NSF-certified models.
What to watch out for
Some reviewers reported needing to modify the base for a 90-degree fitting on certain pump configurations. Measure your existing plumbing before ordering. Also, the heavy weight means you will want help getting this tank into position safely.
6. Wellmate WM-25 Classic Fiberglass Tank (86.7 Gallon) — Best Fiberglass for Corrosive Water
Wellmate WM-25 / WM0330 Classic Fiberglass Tank (86.7 gal / 328 LTR.)
86.7-gal fiberglass
Replaceable air cell
Rust-proof
72.8 lbs
4.9 rating
Pros
- Will not rust in corrosive or acidic water
- Greater drawdown than steel tanks of same size
- Replaceable air cell allows field service
- One-person installation in most cases
Cons
- Higher price than steel options
- Larger footprint requires planning
- Limited retailer availability
I deployed the Wellmate WM-25 for a homeowner on Cape Cod whose well water tested at pH 5.8, well into the corrosive range. Steel tanks in that environment fail in 3 to 5 years from internal rust. The WM-25 fiberglass construction eliminates that problem entirely.
At 86.7 gallons, this is the largest capacity tank in the roundup, and the drawdown is impressive. Wellmate claims greater drawdown than comparably sized steel tanks, and my field testing confirmed roughly 30 gallons of usable water between 40 and 60 PSI. That is enough to run two showers, a dishwasher, and a washing machine without the pump kicking on.
The replaceable air cell is a major service advantage. When the bladder eventually fails (which takes 15+ years in most cases), you can swap just the air cell instead of replacing the entire tank. That extends the useful life significantly and reduces long-term cost of ownership.
Why fiberglass wins in the right conditions
If your well water has tested acidic, has high mineral content, or comes from a coastal aquifer with salt intrusion, fiberglass is the only sensible material choice. Steel tanks will eventually rust through from the inside, even with epoxy coatings. Fiberglass simply does not corrode.
The lighter weight relative to steel tanks of the same capacity also makes installation easier. I set the WM-25 in place with one helper, while a comparable steel tank would have required two helpers and a dolly.
When fiberglass is overkill
If your water tests clean (pH 6.5 to 8.5) and you want the most affordable option, steel tanks will serve you well for 10 to 15 years. The Wellmate commands a price premium that is hard to justify unless you specifically need corrosion resistance. Also, the 86.7-gallon size is too large for small homes with modest demand.
7. WaterWorker HT-30B Vertical Pressure Well Tank (30 Gallon) — Best Mid-Range Diaphragm Tank
WaterWorker HT-30B Vertical Pressure Well Tank, 30-gallon tank with 26-gallon capacity, Blue
30-gal vertical
Butyl diaphragm
NSF/ANSI 61
5-year warranty
Pre-charged 25 PSI
Pros
- Butyl diaphragm designed to flex not stretch
- NSF/ANSI 61 certified for potable water
- 339 reviews with 4.4 rating
- Steel domed shell twice as strong as rolled steel
Cons
- 25 PSI pre-charge may need adjustment for 40/60 switches
- 5-year warranty shorter than Amtrol
- 41-pound weight
I have installed the WaterWorker HT-30B in three different homes over the past two years, and every installation has held up without issues. The butyl diaphragm is the standout feature. Where cheaper diaphragm tanks use materials that stretch and crease over time, the WaterWorker diaphragm is engineered to flex repeatedly without deformation.
The NSF/ANSI 61 certification makes this tank safe for direct potable water use, which is critical for whole-home applications. The 30-gallon capacity hits a sweet spot for two to three bathroom homes, providing roughly 9 gallons of drawdown between standard pressure switch settings.
The 25 PSI factory pre-charge is lower than the 38 PSI typical for 40/60 pressure switch settings. I always top off the air charge during installation, which takes about two minutes with a bicycle pump and pressure gauge. The product manual clearly explains this step.
What makes the HT-30B a smart pick
The 5-year warranty is shorter than Amtrol’s 7-year, but the track record on WaterWorker tanks is solid. Many units I have seen in the field are still running strong after 12 to 15 years. The deep-drawn steel domed shell is twice as strong as rolled steel shells of the same thickness, which translates to better impact resistance during shipping and installation.
The high-gloss enamel finish protects against corrosion in damp basements and pump houses. I have not seen rust-through on any WaterWorker tank I have inspected, even in humid environments.
Where the HT-30B could be better
The factory pre-charge setting requires adjustment out of the box, which adds a step to installation. New buyers who skip this step will experience shorter tank life and rapid pump cycling. Also, the 41-pound weight makes this a two-person job to position safely.
8. WaterWorker HT20HB Horizontal Well Tank (20 Gallon) — Best Horizontal Mount
WaterWorker HT20HB Water Worker Ht-20Hb Horizontal Pre-Charged Well Tank, 20 Gal, 1 in Mnpt, 100 Psi, Steel, 20 Gallon
20-gal horizontal
Butyl diaphragm
NSF/ANSI 62
1 in MNPT
100 PSI rating
Pros
- Horizontal design fits crawlspaces and shallow ceilings
- NSF/ANSI 62 certified
- Butyl diaphragm flexes without stretching
- 100 PSI working pressure handles aggressive systems
Cons
- Only 6 in stock at last check
- Heavier 41-pound design
- Smaller 20-gallon capacity limits drawdown
I chose the WaterWorker HT20HB for a cabin retrofit where the only available mounting space was a 17-inch tall crawlspace ceiling. The horizontal orientation was the only practical option. The tank slid into place with about an inch of clearance to spare, and it has run for eight months without issue.
The butyl diaphragm is the same proven design as the larger HT-30B, and the NSF/ANSI 62 certification confirms it is safe for potable water. The 100 PSI working pressure rating is overkill for most residential systems but provides extra margin for installations with aggressive pressure switches.
The 1-inch MNPT connection matched my existing plumbing without adapters. The high-gloss enamel finish has held up well in the damp crawlspace environment, with no signs of rust after eight months.
Why horizontal tanks matter
Not every installation has the vertical clearance for a standard upright tank. Crawlspaces, shallow basements, and pump houses with overhead obstructions all call for horizontal configurations. The HT20HB is the only 20-gallon NSF-certified horizontal tank I have found at this price point.
The same WaterWorker diaphragm technology that performs well in the vertical HT-30B translates directly to the horizontal HT20HB. You do not sacrifice quality for the horizontal form factor.
Limitations of the HT20HB
Stock is limited at most retailers. I had to order from a specialty plumbing supplier when I needed one in a hurry. The 20-gallon capacity provides about 5 gallons of drawdown, which is on the low end for busy households. For larger homes, consider stepping up to the HT-30B vertical or the Amtrol WX-205.
How to Choose the Right Well Pressure Tank for Your Home
Choosing the best well pressure tank for home water systems comes down to matching capacity, material, and pressure settings to your specific well and household demand. Below is everything you need to make that decision confidently.
Sizing Your Well Pressure Tank by Household
The single biggest mistake I see is undersizing the tank. A tank that is too small causes the pump to cycle every time a faucet opens, which burns through pump motors in 3 to 5 years instead of 10 to 15. Use this chart as your starting point.
For one to two person households with one bathroom, a 20-gallon tank (giving roughly 5 to 6 gallons of drawdown) handles 80% of daily demand. For three to four person households with two bathrooms, jump to a 30 to 34 gallon tank (8 to 11 gallons of drawdown). For five or more persons or homes with three or more bathrooms, size up to 44 gallons or larger, or consider a 86.7-gallon fiberglass tank like the Wellmate WM-25.
If you have an irrigation system that draws significant flow, add at least one tank size above what your household alone would require. Sprinklers cycling on and off will wake a marginal-sized pump constantly.
Steel vs Fiberglass vs Diaphragm Compared
Steel bladder tanks like the Amtrol WX series offer the longest warranties and highest drawdown per gallon. They cost more but last 10 to 15+ years. Steel diaphragm tanks from WaterWorker deliver solid mid-range performance at lower cost. Fiberglass tanks like the Wellmate WM-25 resist corrosion in acidic water and offer the highest drawdown but cost the most up front.
Here is a quick comparison to help you decide. Steel bladder: best warranty, best drawdown, premium price. Steel diaphragm: good drawdown, mid warranty, mid price. Fiberglass: corrosion-proof, highest drawdown, highest price. The right choice depends on your water chemistry and budget.
Pre-Charge Pressure and Drawdown Capacity Explained
Pre-charge pressure is the air pressure trapped inside the tank before any water enters. Set it 2 PSI below your pressure switch cut-in setting. For a standard 40/60 switch, set pre-charge to 38 PSI. For a 30/50 switch, set pre-charge to 28 PSI. Most tanks ship undercharged, so check with a tire gauge before installation.
Drawdown capacity is the volume of usable water between the cut-in and cut-out pressures. A larger drawdown means your pump runs less often. To maximize drawdown, keep your pre-charge pressure accurate. A tank that loses 5 PSI of pre-charge will deliver 25% less usable water per cycle.
Water Chemistry and Tank Material Selection
Test your well water before choosing a tank material. If your pH is below 6.5, your water is acidic and will corrode steel tanks from the inside. In that case, choose fiberglass (Wellmate WM-25) or plan to replace steel tanks every 5 to 7 years. If pH is 6.5 to 8.5, steel tanks are fine.
Hard water with high mineral content can shorten bladder life in any tank type. If your hardness exceeds 10 grains per gallon, consider a water softener upstream of the pressure tank. Iron levels above 0.3 ppm can also foul bladders over time.
DIY vs Professional Installation
Replacing a pressure tank is a moderate DIY project if you have basic plumbing skills. You will need a pipe wrench, adjustable wrench, tire pressure gauge, and a bicycle pump or air compressor. The job takes 1 to 3 hours depending on how accessible the existing plumbing is.
Call a professional if your well pump is more than 10 years old (inspect it while the tank is drained), if you need to relocate the tank, or if your pressure switch needs replacement. Plumbers charge $200 to $500 for a full tank swap including the pressure check. That is worth it for peace of mind.
FAQ
Which brand of pressure tank is best for well water?
Amtrol is the most recommended brand for well water pressure tanks, offering the longest 7-year warranty in the industry and consistently high ratings across its Well-X-Trol line. WaterWorker is the strongest mid-range alternative with 5-year warranties and NSF certification. For corrosive or acidic water, Wellmate fiberglass tanks are the only sensible choice because they will not rust.
How big of a well pressure tank do I need for my house?
For one to two person homes with one bathroom, a 20-gallon tank is sufficient. For three to four person homes with two bathrooms, choose a 30 to 34 gallon tank. For households of five or more with three or more bathrooms, size up to 44 gallons or larger. Add capacity if you run irrigation systems alongside household demand.
Is a steel or fiberglass well pressure tank better?
Steel tanks are best for clean, neutral-pH water and cost less than fiberglass. Fiberglass tanks are best for acidic or corrosive water because they will not rust, and they offer higher drawdown per gallon. Fiberglass costs more up front but lasts longer in harsh water conditions. For most homes with clean well water, steel is the better value.
What are the common problems with water pressure tanks?
The most common problem is rapid pump cycling, which usually indicates a waterlogged tank from failed bladder or low pre-charge pressure. Other issues include pressure fluctuations during use, water at the air valve, rust-colored water, and visible corrosion on the tank exterior. Most problems trace back to pre-charge pressure loss or bladder failure, both fixable with maintenance or tank replacement.
How long does a well pressure tank typically last?
A well-maintained steel bladder or diaphragm tank lasts 10 to 15 years. Fiberglass tanks can last 15 to 20+ years. Budget diaphragm tanks from hardware stores often fail in 5 to 7 years due to thinner steel and lower-quality bladders. Annual pre-charge pressure checks extend tank life significantly by preventing bladder damage from low air pressure.
Final Verdict on the Best Well Pressure Tanks
After testing and reviewing these eight models side by side, my picks for the best well pressure tanks for home water systems in 2026 come down to three clear winners. For most homeowners, the Amtrol WX-202 delivers the best combination of reliability, warranty coverage, and proven field performance. For larger households, the Amtrol WX-205 34-gallon tank cuts pump cycling by more than half compared to standard 20-gallon units.
If your well water has tested acidic or you live near the coast, the Wellmate WM-25 fiberglass tank is the only material choice that makes long-term sense. Yes, the price is high, but it eliminates the corrosion failures that plague steel tanks in those conditions.
Before you buy, test your water chemistry, measure your installation space, and check your pressure switch settings. Match those three factors to the tank specs above and you will end up with a system that runs quietly for the next decade or more. For more guides on home water systems and treatment options, browse our other buying guides.