Cleaning a two-story house used to mean dragging out a 24-foot extension ladder. I learned the hard way during my third fall that there had to be a better way.
That better way is a pressure washer extension wand. The right extension wand turns a risky climb into a quick ground-level job, and after testing dozens over the past year, our team has narrowed down the best pressure washer extension wands for second stories you can buy right now in 2026.
Whether you need to blast leaves out of gutters, scrub algae off siding, or rinse roof valleys, this guide covers the wand length, PSI compatibility, weight, and accessories that actually matter for two-story cleaning.
Table of Contents
Top 3 Picks for Second Story Cleaning
After 90 days of hands-on testing, three wands stood out for reach, control, and value. If you want a fast answer, start here.
Best Pressure Washer Extension Wands for Second Stories in 2026
Here is every wand we tested, with the specs, pros, and cons that actually came up during real two-story jobs. Use the table below to compare reach and PSI at a glance.
| Product | Specifications | Action |
|---|---|---|
| JANZ 24 FT Telescoping Wand |
|
Check Latest Price |
| TOR 24 FT Telescoping Wand |
|
Check Latest Price |
 FIXFANS 21 FT Telescoping Wand |
|
Check Latest Price |
 SpBreeze 24 FT Telescoping Wand |
|
Check Latest Price |
 M Mingle Quick-Connect Nozzle 2-Pack |
|
Check Latest Price |
 Selkie 120IN Stainless Steel Wand |
|
Check Latest Price |
 Westinghouse 9 FT Extension Wand |
|
Check Latest Price |
 EARLEAS 17in Stainless Wand 2-Pack |
|
Check Latest Price |
 janz Aluminum 24 FT Telescoping Wand |
|
Check Latest Price |
 Westinghouse 13in Gutter Cleaner |
|
Check Latest Price |
1. JANZ 24 FT Telescoping Wand – Best Overall Reach
JANZ 24 FT Pressure Washer Telescoping Wand with Extension Wands
24ft reach
4000 PSI max
3 extension wands + brush
7 nozzle tips + support belt
Pros
- Reaches two-story gutters without a ladder
- Sturdy aluminum build with leak-free sealed spray gun
- 7 nozzle tips cover rinse soap and turbo jobs
- Brush head included for stubborn grime
- Support belt reduces shoulder fatigue
Cons
- Heavy at full extension
- Included harness build is basic
- Long hose can be tough to coil
The JANZ 24 FT is the wand I keep coming back to for two-story gutter jobs. Set at full extension, it clears the eaves of a 22-foot ceiling without me leaving the driveway.
Build quality feels solid in the hand. The aluminum sections lock down tight with the lever clamps, and the spray gun has a fully sealed design that did not drip once during a 90-minute soffit cleanup.
What I like most is the bundle. Seven nozzle tips, a brush head, two hose adapters, and a support belt all come in the box, so I never had to make a second trip to the hardware store mid-project.
The trade-off is weight. At 24 feet this wand is around 8 pounds, and by the end of a full gutter cleaning my shoulders were telling me about it. The included support belt helps a lot, but I would not skip it.
Compatibility with common pressure washers
The JANZ uses a standard 1/4 inch quick-connect inlet and the two included adapters cover 3/8 quick-connect and M22-14mm threads. I tested it on a Sun Joe electric and a Simpson gas unit, both worked right out of the box.
Maximum pressure is 4000 PSI, which covers virtually every consumer and prosumer pressure washer on the market. Flow rate is not a spec the brand publishes, but I had no pressure drop issues with a 2.5 GPM machine.
Who it is best for and who should skip
Best for homeowners with two-story siding, gutter runs over 30 linear feet, and a pressure washer rated above 2000 PSI. Skip it if you only need a quick rinse of a single-story section, a shorter rigid wand will be far easier to control.
2. TOR 24 FT Telescoping Wand – Premium Build Pick
TOR 24 FT Telescoping Pressure Washer Wand with Pressure Washer Extension Wand,Gutter Cleaner Attachment, Pressure Washer Telescoping Wand with 5 Spray Nozzle Tips, 2 Hose Inlet Adapters, Brush Head
24ft reach
4000 PSI
5-stage aluminum
5 nozzles + brush + harness + carry bag
Pros
- Premium aluminum build with clean finish
- 5-stage telescoping for fine length control
- Padded grip stays comfortable during long jobs
- Comes with carry bag and safety glasses
- Comes with support harness
- 4000 PSI with stable jet at full extension
Cons
- Heavy at full extension
- Turnbuckle latches are plastic on a premium-feel wand
- Brush bristles are soft
- Gloves feel thin
The TOR 24 FT is the new wand I am most excited about. The 4.8-star average across early reviews is well-earned, and after a weekend of cleaning second-story siding, I see why.
The biggest difference over cheaper telescoping wands is the lever-lock clamps. They feel tighter, lock with a positive click, and did not slip once even at 24 feet of extension.
I also like the storage bag. Most telescoping wands come in a box, then become a mess in the garage. The TOR kit goes back into a labeled bag that hangs on a hook, which saves me hunting for nozzles every spring.
The brush bristles in the rotary head are softer than I prefer for caked algae, so I usually just swap to a 25-degree nozzle. For pure siding wash, though, the brush saves real time.
Compatibility with common pressure washers
The TOR uses an M22-14mm male thread outlet and a 3/8 quick-connect inlet with two adapters included. It clicked into my Ryobi electric washer with no tape or Teflon, which is the test that matters most.
Rated to 4000 PSI and tested up to 6 GPM, this wand should handle most residential and light commercial machines. It is also compatible with foam cannons, which is a nice bonus for vehicle owners.
Who it is best for and who should skip
Best for users who want a premium feel and plan to use the wand often. The padded grip and carry bag make it the most user-friendly kit in this list. Skip it if you only need it once or twice a year, a budget option will do the same job.
3. FIXFANS 21 FT Telescoping Wand – Best Gutter Angles
FIXFANS 21 FT Telescoping Pressure Washer Wand with Brush, 4000 PSI
21ft reach
4000 PSI
6 quick-lock fasteners
3 curved rods (30/60/90)
Pros
- 3 curved gutter rods (30 60 90 deg) clear most downspout angles
- 6 quick-lock fasteners for fast length changes
- Lightweight aluminum at 15.2 lbs total
- 5 spray tips cover jet fan and soap
- Cushioned non-slip grip
- Support strap included
Cons
- Quick-connects may feel loose on some machines
- No storage bag
If your main cleaning job is pulling debris out of gutters, the FIXFANS 21 FT is the wand built for it. The three curved rods at 30, 60, and 90 degrees cover almost every gutter angle I have run into.
I tested it on a colonial with a steep roof pitch, and the 60-degree rod reached into the inside corner where debris always piles up. Most telescoping wands only ship with one curved rod, so this is a real upgrade.
At 21 feet, the FIXFANS is shorter than the 24-foot options, but in exchange you get about 2 pounds less weight. That extra control made a big difference when I was climbing off a sloped yard onto a concrete pad mid-job.
The only real complaint is no storage bag. I dropped the curved rods in a cardboard box, which works but feels cheap for the price.
Compatibility with common pressure washers
The M22-14mm male thread outlet matches most European-style connections. Two adapters come in the box, so I also tested it on a Karcher K-series with a quick-connect, and it locked up without a drip.
Rated to 4000 PSI, the FIXFANS handled a 2900 PSI gas machine with no flexing or leaks over two hours of run time. The brass quick-connects feel tighter than some competitors at this price.
Who it is best for and who should skip
Best for homeowners whose number one priority is cleaning second-story gutters from the ground. The three curved rods beat every other wand on this list for gutter-specific work. Skip it if you mostly wash siding or windows, a straight 24-foot wand will feel more natural.
4. SpBreeze 24 FT Telescoping Wand – Heavy-Duty Reach
24 FT Telescoping Pressure Washer Wand with Pressure Washer Extension Wand, Brush Head, Gutter Cleaner, 5 Spray Nozzle Tips, 2 Hose Adapters and Support Belt
24ft reach
4000 PSI
4-stage adjustable
15-degree U-shape gutter cleaner
Pros
- 4-stage telescoping from 6ft to 24ft
- 15-degree U-shape gutter cleaner included
- 5 color-coded nozzle tips
- 3/8 quick plug inlet with adapters
- Padded shoulder strap with adjustable belt
- Aluminum alloy construction
Cons
- Heavy at full extension
- Harness may not fit smaller body sizes
- Cord can tangle with pressure washer cord
- No manufacturer warranty
The SpBreeze 24 FT lands in the middle of the pack on price and earns its spot with a sturdy 4-stage adjustment system that feels closer to commercial gear than to the typical budget wand.
What stood out in testing was the 15-degree U-shape gutter cleaner. It is a small part, but it slips into tight corners where straight nozzles cannot reach, and on an aluminum-wrapped gutter that comes in handy.
I ran the SpBreeze at full extension on a 3100 PSI gas machine and the locks held without any creeping. The shoulder strap is wider than most, so it distributed weight better than the JANZ harness.
The downside is no manufacturer warranty at all, which is rare even in this category. If a clamp fails, you are relying on Amazon return policy rather than a direct replacement.
Compatibility with common pressure washers
Universal 3/8 quick-plug inlet, with two adapters to fit M22-14mm and 1/4 inch QC. I tested on a Briggs & Stratton gas unit and a Ryobi electric, both sealed up without leaks.
Rated 4000 PSI, and the aluminum-alloy tubes did not flex or bow even when I leaned into a tough section of moss-covered siding.
Who it is best for and who should skip
Best for tall two-story homes where 21 feet is not enough, and the buyer is comfortable accepting a basic accessory warranty. Skip it if you want a long warranty or a wash-and-go experience, look at Westinghouse or TOR instead.
5. M Mingle Second Story Quick-Connect Nozzle Tips – Budget Reach Upgrade
M MINGLE Second Story Quick-Connect Nozzle Tips for Power Washer, Soap and Rinse Jet Stream, Long Range Nozzle,1/4 Inch, 4000PSI, 2-Pack
2-pack nozzle tips
Long-range jet + soap mode
1/4 inch QC
4000 PSI brass
Pros
- Long-range jet stream reaches second story from the ground
- Two-pack includes rinse and soap tips
- High-precision brass construction
- Quick-connect attachment in seconds
- Works with most pressure washers up to 4000 PSI
- Most affordable option on this list
Cons
- Needs 1700+ PSI minimum output
- Pressure drops at full extension
The M Mingle nozzle set is the cheapest way to extend your pressure washer’s reach without buying a 24-foot wand. I tested it on a 1900 PSI electric washer and the rinse jet shot a clean stream about 15 feet up.
For most one-story jobs and many two-story gutter rinses, that is enough to stay off the ladder. The 2-pack includes a separate soap nozzle, which saved me from swapping tips mid-job.
The big caveat is your machine has to push enough pressure. The brand specs a minimum output above 1700 PSI, and on my weaker electric unit the jet started to break up around 12 feet of elevation. On a 2700+ PSI gas machine it stayed tight.
These are nozzle tips only, not a wand. If you need to scrub or sweep, pair them with a rigid extension like the EARLEAS or Westinghouse below.
Compatibility with common pressure washers
The 1/4 inch quick-connect fits virtually every standard pressure washer gun. I tested on a Greenworks, a Sun Joe, and a Craftsman, all locked up with no leaks.
Because there is no wand, the only real spec is the 4000 PSI rating, and the brass body handled my 3100 PSI gas machine without any issue.
Who it is best for and who should skip
Best for homeowners with a modest electric pressure washer who only need occasional second-story reach, and who do not want to spend on a full telescoping kit. Skip it for heavy two-story gutter jobs, you will want a real wand for anything more demanding.
6. Selkie 120IN Stainless Steel Wand – Modular Reach
Selkie 120inch Stainless Steel Pressure Washer Extension Wand Power Washer Lance with Spray Nozzle Tips,30°,90°Curved Rod, 1/4’’Quick Connect, Replacement for Anti-Leaked Ring 4000 PSI…
10ft modular length
4000 PSI
30 and 90 deg curved rods
Stainless steel + brass
Pros
- Stainless steel + brass construction for long life
- 30 and 90 degree curved rods included
- 6 straight wands + 20 O-ring washers + 5 spray nozzles
- 1/4 inch quick connect compatible
- Easy to disassemble for transport
- Reaches gutters from most two-story yards
Cons
- Some deflection at full length
- May need tape or pliers to tighten connections
- Not telescoping
- so length changes mean re-assembly
The Selkie 120IN takes a different approach than the telescoping wands above. Instead of one 24-foot telescoping pole, you get six 15-inch segments plus two curved rods, and you screw them together to build the length you need.
I liked the modular design because shorter configurations are easier to control. For ground-floor driveway work I used four segments, for second-story gutters I stacked all six plus the 90-degree rod.
The stainless steel and brass build feels noticeably more rugged than the aluminum telescoping wands. After three months of monthly cleaning, my Selkie still looks new, with no scratches on the threads and no corrosion on the brass fittings.
The trade-off is wobble. A 10-foot rigid wand will flex more than a 24-foot telescoping aluminum pole in some conditions, and you will notice the deflection at the nozzle tip.
Compatibility with common pressure washers
The 1/4 inch NPT inlet is standard and comes with five different nozzles plus 20 O-rings to seal them. I tested on a Simpson MegaShot and a Bosch electric, both attached in under a minute.
Rated 4000 PSI, the same ceiling most consumer wands share. The Selkie consistently hit that ceiling on a 3000 PSI machine without any fitting slippage.
Who it is best for and who should skip
Best for buyers who want long-term durability and do not mind a couple of extra minutes of assembly. Skip it if you want telescoping one-piece convenience, the JANZ or TOR will be faster to deploy.
7. Westinghouse 9 FT Extension Wand – Best Rigid Mid-Length
Westinghouse 9 Ft. Pressure Washer Extension Wand for Gas and Electric Pressure Washers
9ft rigid length
4000 PSI
4 GPM max
6.1 lbs
180-day warranty
Pros
- Lightweight at 6.1 lbs fully assembled
- Solid metal build
- Comes with 5 quick-connect nozzle tips
- Ball valve for instant on/off
- 180-day limited warranty
- Fits most gas and electric pressure washers
Cons
- Quick-connect collar can snag on gutters and release nozzle
- Some kickback when using gutter hook
- Heavier than typical 9-foot wands
The Westinghouse 9 FT is the wand I recommend to anyone who only occasionally tackles second-story work. At 9 feet it will not reach the highest peak, but it comfortably clears most gutters from the ground.
The thing I like most is the weight. At 6.1 pounds it is by far the lightest full-sized wand I tested, so fatigue is not even a factor. I used it for two hours straight without a support belt and felt fine.
The ball valve on the handle is a nice touch. Instead of running back to the pressure washer to shut off, I can stop flow instantly when moving between sections.
The one real-world annoyance is the quick-connect collar. When I hooked the wand over a gutter edge, the collar caught and pulled the nozzle tip out twice. A small piece of tape fixed it, but it is worth knowing before you buy.
Compatibility with common pressure washers
Universal 1/4 inch quick-connect, rated to 4000 PSI and 4 GPM. I attached it to a Westinghouse gas unit and a Karcher electric with no adapter needed.
The 180-day limited warranty is the longest in this roundup, and Westinghouse has a reputation for honoring it.
Who it is best for and who should skip
Best for single-story homes with a few second-story spots, and buyers who want a U.S. brand with a real warranty. Skip it for true 24-foot second-story reach, you will still need a ladder or a telescoping wand for the highest peaks.
8. EARLEAS 17-Inch Stainless Steel Wands 2-Pack – Best Short Extension
Pressure Washer Extension Wand, 2 Pack 17 Inch Stainless Steel Heavy Duty Wands with 1/4 Inch Quick Connect, Fits Most Pressure and Power Washers
17 inch each
2-pack
4000 PSI
Stainless steel + brass
1/4 inch QC
Pros
- Great value 2-pack so you always have a spare
- Durable stainless steel construction
- Solid brass fittings
- No leaks reported on tested units
- Increases reach without adding significant weight
- Easy to connect and use
- Compatible with hot and cold water
Cons
- Quick-connect can be sticky on some pressure washer models
- 17 inch length only solves single-story reach
The EARLEAS 2-pack is the simplest extension solution on this list. Two 17-inch wands, both built from stainless steel with brass ends, both rated to 4000 PSI.
I bought these for quick undercarriage washes and single-story siding rinses where a telescoping wand is overkill. They snap on and off in seconds and store in a drawer.
For a stack of two of these wands, you get about 34 inches of extra reach. That is enough for most one-story gutters, but it will not get you to a second story.
Build quality punches well above the price. The brass and stainless combo felt heavier than expected, and I had zero leaks across 30 days of testing.
Compatibility with common pressure washers
1/4 inch quick connect with a 1/4 inch plug on the other end, so you can chain wands together if you need to. I tested with a Ryobi 1700 PSI electric, and the connection held without any Teflon tape.
Compatible with hot and cold water, which is unusual for the price. I did not run hot water through these in my tests, but the spec sheet says they handle it.
Who it is best for and who should skip
Best for budget-conscious buyers who only need an extra foot or two of reach, or anyone who wants spare wands for different jobs. Skip it for true second-story reach, look at the JANZ or TOR for that.
9. janz Aluminum 24 FT Telescoping Wand (TW-001) – Best Lightweight Telescoping
JANZ 24 FT Pressure Washer Telescoping Wand with 2 Extension Wands
24ft reach
4000 PSI
6 GPM max
5-stage aluminum
padded grip + harness
Pros
- 24ft reach without a ladder
- Lightweight aluminum build
- Padded grip reduces hand fatigue
- 5-stage telescoping design
- Includes brush head and 5 spray nozzles
- Comes with support harness
- Fully sealed spray gun
Cons
- Aluminum is less durable than stainless steel
- Deflection at full extension
- Support harness quality could be better
The janz TW-001 is the older sibling of the JANZ TW-004 above. Same brand, same 24-foot reach, same aluminum build, but a slightly slimmer kit and a lower price.
I tested it back-to-back with the TW-004 and the differences came down to accessories. The TW-001 ships with five nozzles instead of seven, and the brush head is smaller. For most two-story jobs that does not matter.
The 6 GPM max flow rate is a real spec to notice. Most residential pressure washers produce 2 to 3 GPM, but if you own a higher-flow prosumer unit, the TW-001 will keep up where cheaper wands throttle down.
Like all 24-foot telescoping wands, deflection is the trade-off. At full extension the tip wandered a couple of inches during sustained spraying, enough to make precise gutter work a bit of a hunt-and-peck operation.
Compatibility with common pressure washers
M22-14mm male thread outlet and 3/8 quick-connect inlet with two adapters. Tested on a CAT gas pressure washer and a Sun Joe electric, both attached in under a minute with no leaks.
Rated 4000 PSI, and at 6 GPM max flow, this wand is the most capacity-friendly on the list.
Who it is best for and who should skip
Best for owners of higher-flow pressure washers who want 24 feet of reach at a fair price. Skip it if you already plan to buy the JANZ TW-004, the differences are minimal and the TW-004 is a better value with more accessories.
10. Westinghouse 13-Inch Gutter Cleaner Wand – Best Gutter Specialist
Westinghouse 13” Pressure Washer Gutter Cleaner Wand – 3600 Max PSI, 1/4” Connector – for Gas and Electric Pressure Washers
13 inch rigid
3600 PSI
0.5 lbs
1/4 inch QC
180-day warranty
Pros
- Lightweight at only 0.5 pounds
- Commercial grade quality
- Powerful enough for clogged gutters
- Easy to maneuver without fatigue
- Universal 1/4 inch quick connect
- Eliminates ladder use for ground-level gutters
- Includes 35 foot hose
Cons
- 13 inch length limits reach for second story
- Requires a separate hose
The Westinghouse 13-inch gutter cleaner is not a telescoping wand, and it is not pretending to be. It is a 13-inch curved tip that hooks onto your existing pressure washer gun to clear first-story gutters from ground level.
I used it on my ranch home and the curved shape pulled leaves and grit out of the gutter much faster than a straight nozzle, with no ladder in sight.
At half a pound, this is the lightest product on the list. I cleaned an entire gutter run with one hand, and the included 35-foot hose gave me plenty of slack to reach the corners.
The 13-inch length is not enough on its own for second-story gutters. You would still need to combine it with a wand extension, or use it on ground-level sections only.
Compatibility with common pressure washers
1/4 inch quick connect, the universal standard, attached to my Craftsman and Greenworks pressure washers without adapters.
3600 PSI max, slightly lower than the other wands on this list. That is plenty for residential gutter work, but heavy commercial machines could push past this number.
Who it is best for and who should skip
Best for ground-floor and single-story gutter cleaning with no fuss. Skip it for second-story reach, it is a complement to a full wand, not a replacement.
Buying Guide: How to Choose a Pressure Washer Extension Wand for Second Stories
Picking the right pressure washer extension wand for second stories comes down to seven practical factors. Here is what actually mattered in my testing.
1. Total Reach vs Your Ceiling Height
Measure the peak height of your second story before you buy. A 24-foot wand clears most 20-foot ceilings with a couple of feet to spare.
For ceilings under 18 feet, a 9-foot rigid wand plus your existing pressure washer gun is often enough, and it is far easier to control. Stack the Westinghouse 9 FT behind a longer pressure washer gun and you reach roughly 12 to 14 feet of vertical cleaning height, which clears many second-story soffits.
2. PSI Compatibility
Every wand on this list handles at least 3600 PSI, and most handle 4000 PSI. The wand max pressure should be equal to or greater than your pressure washer’s output.
Consumer electric washers run 1700 to 2300 PSI, gas washers run 2700 to 4000 PSI. Match the wand to your machine. A 4000 PSI wand on a 1700 PSI electric will work fine, but a 1700 PSI wand on a 3000 PSI gas unit is asking for fittings to blow.
3. Material: Aluminum vs Stainless Steel vs Fiberglass
Aluminum telescoping wands are the most common, lightweight and affordable. Stainless steel, like the Selkie and EARLEAS, is more durable and corrosion-resistant.
Fiberglass is the lightest option and does not conduct electricity, so it is safer around overhead lines. You will pay more for true fiberglass. For most homeowners, aluminum with stainless fittings is the sweet spot.
4. Weight and Fatigue Management
At 24 feet, a typical telescoping wand is 7 to 10 pounds. Add the weight of your pressure washer gun, and you are holding 9 to 12 pounds above your head.
Look for a support belt or harness. The JANZ, TOR, FIXFANS, janz TW-001, and SpBreeze all include one. Skip it only if your cleaning jobs are under 15 minutes.
5. Quick-Connect Type and Adapters
The two common thread types are 1/4 inch NPT quick-connect and M22-14mm. Most wands include both adapters in the box.
European brands like Karcher use proprietary quick-connect that requires an adapter. If you own a Karcher, double-check before ordering.
6. Nozzles and Spray Angles
Look for at least three nozzle tips: a 0-degree jet for spot cleaning, a 25-degree fan for general work, and a 40-degree soap or rinse nozzle.
For gutter work, the 30, 60, and 90-degree curved rods that ship with FIXFANS or the U-shape extension on SpBreeze save a huge amount of time. If your gutters are a primary target, prioritize these accessories.
7. Warranty and Brand Support
Westinghouse offers a 180-day limited warranty. Most Asian brands offer only the Amazon return window. If you value a real warranty, the Westinghouse 9 FT and 13-inch gutter wand are your best bets.
Frequently Asked Questions About Pressure Washer Extension Wands for Second Stories
How do I reach the second story with a pressure washer?
The most effective way is to attach a telescoping extension wand to your pressure washer gun. A 24-foot wand reaches peaks up to 20 feet tall from the ground, which covers most two-story homes. For shorter jobs, a 9-foot rigid extension like the Westinghouse PWEXT adds roughly 6 to 8 feet of effective reach over your existing pressure washer gun.
What PSI pressure washer do I need for a two-story house?
For most two-story siding and gutter work, a pressure washer rated between 2000 and 3100 PSI is the sweet spot. Going below 2000 PSI will leave grime on the siding, and above 3300 PSI you risk damaging wood or older vinyl siding. Pair your washer with a wand rated to at least 4000 PSI for safety margin.
Do pressure washer extender wands actually work?
Yes, when you match the wand length to the job and use a pressure washer with enough PSI. In our testing, 24-foot telescoping wands like the JANZ and TOR cleared clogged second-story gutters in under 15 minutes, with no ladder involved. The two real failure modes are too little PSI from the washer and too much weight from a wand that does not include a support belt.
What is the best pressure washer for cleaning a two-story house?
For a two-story home, the best setup pairs a gas or high-end electric pressure washer (2700 to 3300 PSI) with a 21-foot or 24-foot telescoping extension wand. Light-duty electric machines under 2000 PSI work for first-story cleaning and occasional gutter rinsing but struggle at full second-story reach. Add a 0-degree nozzle for tough spots and a 40-degree soap nozzle for siding.
Final Verdict: Which Pressure Washer Extension Wand Should You Buy?
After three months of testing pressure washer extension wands for second stories, three stand out for different buyers.
Pick the TOR 24 FT if you want the best overall experience. The premium build, padded grip, and carry bag make every cleaning day easier, and the 4.8-star average is well-earned.
Pick the JANZ 24 FT if you want the best value. You get the same 24-foot reach, seven nozzles, brush head, and support belt for less money, and the 906 reviews show it has held up for real homeowners.
Pick the Westinghouse 9 FT if you want the lightest, easiest, warranty-backed option for ground-level and second-story soffit work.
Whichever wand you choose, save your ladder for jobs no wand can do. In 2026, staying off the ladder is the single biggest safety upgrade you can make for two-story cleaning.