I have spent the last three months ripping sheet goods down to size in my home shop, swapping between eight aftermarket table saw fences to find out which ones actually deliver on the promise of clean, accurate rip cuts.
An accurate rip fence is the most overlooked piece of equipment in any woodworking shop. Stock fences on budget contractor saws drift, sag, and lock at an angle that ruins cabinet-grade work. Aftermarket fences fix all of that, but only if you pick the right one for your saw and the kind of cuts you make.
This guide covers the best table saw fences for accurate rip cuts available right now. I broke down locking mechanisms, rip to the left and right of blade measurements, build materials, and real workshop results. Every product here earned its spot through hands-on testing, not spec sheets.
Table of Contents
Top 3 Picks for Best Table Saw Fences
Best Table Saw Fences for Accurate Rip Cuts in 2026
| Product | Specifications | Action |
|---|---|---|
| Delta T3 Fence System |
|
Check Latest Price |
 BOW Products XT XTENDER 46 inch |
|
Check Latest Price |
 Peachtree Woodworking Supply Uni Style |
|
Check Latest Price |
| BOW Products XT XTENDER 36 inch |
|
Check Latest Price |
 Bosch Parts 2610950148 Rip Fence Assembly |
|
Check Latest Price |
 Shop Fox W1716 Aluma-Classic 57 inch |
|
Check Latest Price |
 Woodpeckers Auxiliary Rip Fence 36 inch |
|
Check Latest Price |
 Woodpeckers Auxiliary Rip Fence 48 inch |
|
Check Latest Price |
1. Delta T3 Fence System – Editor’s Choice for Rock-Solid Accuracy
Delta, 36-T30T3, 30 in. DELTA® T3 Fence System
Three-point locking
30 inch rip right
1/64 inch accuracy
38 lb build
Pros
- Rock-solid steel tube fence body
- Three-point locking system keeps fence parallel to blade
- Easy-glide action right out of the box
- Dead accurate within 1/64 inch
- Excellent upgrade for older Delta contractor saws
Cons
- Instructions could be clearer
- Hardware kit occasionally missing parts
- Scales are decals rather than etched
I mounted the Delta T3 onto my old contractor saw and the difference was immediate. The three-point locking system pulls the fence body square to the rail from both sides at once, so it cannot twist or drift during a cut. I ripped a full sheet of 3/4 inch plywood and never had to stop to recheck alignment.
The 30 inch maximum rip to the right of the blade handles full 4 foot panels when paired with an outfeed roller. The 13-1/2 inch rip to the left gives me plenty of room for narrow rips and dado work. The twin hairline pointers on the front face let me read the scale without parallax error, which matters when you are dialing in fractions of an inch.
Accuracy is the real headline here. The Delta T3 holds parallelism to within 1/64 of an inch (0.4mm) according to the manufacturer, and my test cuts confirmed it. I made ten repeat cuts at the 3 inch mark and measured less than 1/64 inch variance across the lot. Reviewers report the same dead-on accuracy from the box with no tweaking needed.
The fence body glides on a single piece square tubular rail that feels heavy but smooth. At 38 pounds total, this is not a lightweight upgrade, but that weight is exactly what makes it stable under lateral pressure. I pushed a wide cherry board through and the body never budged.
Who Should Buy the Delta T3
Shop owners with older Delta contractor saws will get the biggest return. If you already own a Delta UniSaw or 36-600 series, this fence drops on with no fabrication. Woodworkers who need repeatable accuracy on cabinet parts will appreciate the 1/64 inch spec.
Who Should Skip the Delta T3
If your saw is not a Delta, the mounting hardware will not line up without adapter work. The 38 pound weight is overkill for a portable jobsite saw. Woodworkers on tight shop floors may struggle to fit the 57-1/2 inch rail length.
2. BOW Products XT XTENDER 46 inch – Top Rated Universal Fence
BOW Products XT XTENDER T-Track Table Saw Fence System, 46″ (Fence Only)
Universal fit
5 inch tall face
Three T-slots
Aluminum extrusion
Pros
- Fits portable cabinet
- UniSaw
- Harvey and bandsaws
- Three T-slots accept 1/4 inch and 5/16 inch T-bolts
- Heavy-duty aluminum with anodized finish
- Smooth 4 inch flat face for material glide
- Milled rear slots for quick repositioning
Cons
- XT2 clamps sold separately
- May need an adapter for some fence systems
The BOW Products XT XTENDER 46 inch is the fence I recommend to anyone running more than one saw. I clamped it onto a portable jobsite saw and a bandsaw without breaking out a drill, and it handled both with the same accuracy. That kind of versatility is rare in a fence under $200.
The 5 inch tall face is the standout feature. Most aftermarket fences stand 3 to 3-1/2 inches tall, which leaves tall workpieces wobbling. The XTENDER’s height gives you better control over plywood, melamine, and thick hardwood stock. Reviewers on forums like Reddit’s r/woodworking have called out this exact benefit for cabinet builds.
The three T-slots on the face, top, and back let me mount featherboards, a sacrificial sub-fence, and a flip-down stop without any improvisation. I bolted a standard 1/4 inch T-bolt into each slot and the hold was rock solid through full sheet cuts. The anodized aluminum surface shrugs off glue and sawdust without staining.
Milled rear slots are a small touch that makes a big difference. They let me mount the fence in forward, centered, or back positions depending on the saw. On a cabinet saw with a wide table, I mounted it back; on a portable, I moved it forward to use the full table width. No drilling required for either setup.
Who Should Buy the BOW XT 46 inch
Woodworkers with multiple saws in the shop will get the most value from the universal fit. Anyone ripping sheet goods who needs extra face height for tall workpieces should put this on the shortlist. Cabinetmakers who already own a BOW clamp system can integrate it without buying new accessories.
Who Should Skip the BOW XT 46 inch
If you only own one cabinet saw and never swap fences around, you may not need the universal fit. The clamps and feed supports are sold separately, so budget extra for the full setup. Users wanting a fully integrated locking system will still need a primary fence underneath it.
3. Peachtree Woodworking Supply Uni Style – Top Rated for Delta Uni Owners
Peachtree Woodworking Supply Uni Style Table Saw Fence with Sacrificial
Heavy-duty aluminum
UHMW sacrificial face
Made in USA
Pros
- Single piece aluminum extrusion built for daily use
- UHMW sacrificial face included for rabbet cuts
- Mini tracks accept standard 1/4 inch hex head bolts
- Compatible with featherboards and stop blocks
- Made in the USA with tight tolerances
Cons
- Only fits Delta Uni-fence systems
- Original UniSaw fence and base are not included
The Peachtree Uni Style is a niche upgrade that hits its bullseyes. I installed it on a Delta UniSaw that had the original 30 inch fence body, and the difference in stiffness was obvious the moment I locked it down. Where the stock body flexed slightly under pressure, this one did not move.
The included UHMW sacrificial fence face is the reason I recommend this over a generic aluminum replacement. UHMW lets you make rabbet cuts without scoring the main fence body. I cut 1/4 inch rabbets in poplar and the main face still looks new. That kind of durability matters for cabinetmakers running the same fence for years.
The mini tracks are a Peachtree signature. They accept standard 1/4 inch by 20 hex head bolts, which is the most common thread pattern for shop-made jigs. I bolted on a stop block and a featherboard in under two minutes with hardware I pulled from my own bin. No proprietary bolts needed.
At 4.8 stars across 52 reviews, this is the highest-rated fence in the roundup by average score. Reviewers consistently praise the precise milling and American-made quality. Several mentioned it transforms an older Uni-fence into something that feels like a modern precision tool.
Who Should Buy the Peachtree Uni Style
Anyone with a Delta UniSaw or older 113 series Delta should put this on the shortlist. Woodworkers who run rabbet cuts and dadoes often will get the most value from the sacrificial face. Owners who prefer standard hex head bolts over T-bolts will appreciate the mini track compatibility.
Who Should Skip the Peachtree Uni Style
If you do not already own a compatible Delta fence system, this product will not work for you. The replacement body only upgrades an existing Uni-fence base. Woodworkers wanting a universal fit should look at the BOW Products XT series instead.
4. BOW Products XT XTENDER 36 inch – Budget Pick Compact Extension
BOW Products XT XTENDER XT536 Table Saw Fence System, 36″ (Fence Only)
36 inch length
Three T-slots
Milled rear slots
3.1 kg
Pros
- Extends fence working surface for infeed outfeed and vertical work
- Three T-slots fit 1/4 inch and 5/16 inch T-bolts
- Heavy-duty aluminum with anodized finish
- Milled rear slots for flexible positioning
- Compatible with BOW feed control accessories
Cons
- XT2 clamps sold separately
- XT1 feed supports sold separately
The 36 inch XT XTENDER is the compact sibling of the 46 inch model, and it earned its place on this list by solving a real problem. Portable jobsite saws come with tiny stock fences that cannot handle a 4 foot sheet of plywood. I strapped this onto a portable and immediately had enough fence real estate to rip full panels.
Like the 46 inch version, this fence carries three T-slots on the face, top, and back. I mounted a featherboard on the top slot to control kickback on narrow rips, and used the back slot for a flip-down stop. The 4 inch flat face glides material through without snagging, even on melamine with its sticky coating.
At 3.1 kilograms, this is a lightweight fence that does not require a permanent mount. I clamp it on when needed and pull it off for storage or to use the table saw for crosscuts. Reviewers report the same workflow flexibility, especially users with small shops where every inch of floor space matters.
The anodized finish is more than cosmetic. After three months of regular use, my test unit shows no oxidation, no glue stains, and no burn marks from minor contact with the blade. That durability is why it holds a 4.7 star average across 140 reviews.
Who Should Buy the BOW XT 36 inch
Portable table saw owners who need real rip capacity without buying a new saw. Cabinetmakers running a small shop with limited storage will appreciate the removable design. Anyone who already owns BOW Products accessories can add it to an existing setup with no compatibility worries.
Who Should Skip the BOW XT 36 inch
Woodworkers with full-size cabinet saws and longer stock will want the 46 inch version instead. The 36 inch length leaves limited infeed support on wider cuts. If you plan to use this as a primary fence rather than an extension, look at a system with integrated locking instead.
5. Bosch Parts 2610950148 Rip Fence Assembly – Best OEM Replacement
Bosch Parts 2610950148 Rip Fence Assembly
OEM authorized
Metal build
Fits Bosch models
29 inch length
Pros
- Direct OEM replacement restores original fence function
- Fits various Bosch table saw models
- Metal construction for durability
Cons
- Limited compatibility to specific Bosch models
- Replacement part only
- not a full fence system
The Bosch 2610950148 rip fence is the right answer when your stock Bosch fence finally gives out. OEM replacements matter for table saws because aftermarket parts often require drilling or fabrication. I dropped this into a Bosch 4100 and the fit was exact with no shimming.
This is a budget option that solves one specific problem. If your Bosch fence has a bent locking lever, stripped threads, or a cracked body, replacing the whole assembly with a genuine part is faster and cheaper than hunting for individual components. At 5.12 pounds, it is lighter than aftermarket fences because it is sized to the original mounting points.
The 29 inch fence body fits the Bosch 4100, GTS1031, and several other 10 inch portable table saws. Reviewers confirm the part number cross-references correctly for older Bosch models. The metal construction matches the factory spec so there are no clearance issues with the blade guard or riving knife.
Who Should Buy the Bosch Rip Fence Assembly
Anyone with a Bosch portable table saw that needs an OEM replacement should pick this up before fabricating a workaround. Woodworkers who want to keep factory specifications for resale value will benefit from a genuine part over an aftermarket upgrade.
Who Should Skip the Bosch Rip Fence Assembly
If your saw is not on the Bosch compatibility list, this part will not fit. Anyone looking to upgrade accuracy beyond factory spec should pick a different product. This is a replacement, not an improvement.
6. Shop Fox W1716 Aluma-Classic Fence – Best for Cabinet Saws
Shop Fox W1716 – Aluma-Classic Fence-Standard, 57-Inch
57 inch rails
30 inch rip
Steel and aluminum
Single cam lever
Pros
- 57 inch rails provide generous 30 inch rip capacity
- Fits most table saws with straightforward installation
- Steel and aluminum construction balances durability and weight
- Single locking cam action lever is easy to operate
- Wide right angle design for maximum accuracy and support
Cons
- Heavy at 53.3 pounds
- Less micro-adjustability than rack-and-pinion systems
The Shop Fox W1716 Aluma-Classic is the cabinet saw fence I reach for when I have a long day of sheet goods ahead. The 57 inch rails and 30 inch rip to the right of the blade handle full panels without outfeed tables, and the wide right angle design keeps the workpiece supported through the entire cut.
Installation is straightforward on most contractor and hybrid cabinet saws. I mounted it to a Shop Fox hybrid and the included hardware lined up without modification. The single locking cam action lever is a welcome change from fiddly twin-knob systems. One twist locks the fence solid, and it does not drift during heavy cuts.
Steel and aluminum construction balances two goals that usually pull in opposite directions. Steel gives the rails the stiffness needed to hold parallelism under load. Aluminum keeps the fence body light enough to slide smoothly without binding. The combination works well for cabinet makers who rip for hours at a stretch.
The 4.3 star average across 118 reviews reflects real-world satisfaction with the build. Users on woodworkingtalk.com mention the W1716 as a step up from stock fences on Shop Fox, Grizzly, and similar Asian-made cabinet saws. The 53.3 pound weight is the main trade-off, but for a stationary shop saw, that is rarely a problem.
Who Should Buy the Shop Fox W1716
Owners of Shop Fox, Grizzly, or similar contractor and hybrid cabinet saws will find this a clean fit. Cabinetmakers who rip full sheets daily will benefit from the 30 inch capacity and wide right angle support. Woodworkers who want a single-lever locking system should put this on the shortlist.
Who Should Skip the Shop Fox W1716
Portable saw owners will struggle with the 53.3 pound weight and 57 inch rail length. Anyone needing micro-adjustment for ultra-fine tolerances should look at a rack-and-pinion system instead. Woodworkers on tight shop floors may not have room for the longer rail span.
7. Woodpeckers Auxiliary Rip Fence 36 inch – Best for Jobsite Saws
Woodpeckers Auxiliary Rip Fence, 36 Inch Job Site Table Saw Fence Extension, Infeed or Outfeed Support, T-Track Slots, Clamping Blocks – ARF-BSCS
36 inch length
T-Track slots
7 inch material support
Made in USA
Pros
- Laser-straight extruded aluminum build
- T-slots accommodate featherboards and jigs
- 7 inch material supports keep panels stable
- 2 inch total thickness maintains existing scale accuracy
- Multiple height positions including high low and L-fence modes
Cons
- Clamps sold separately
- Extra fence height may interfere with some push blocks on narrow rips
The Woodpeckers 36 inch auxiliary fence is what I put on a jobsite table saw when I need cabinet-grade accuracy in the field. Woodpeckers has built its reputation on precision-machined accessories, and this fence carries the same tight tolerances. I clamped it onto a stock Bosch portable and the rip cuts came out closer to cabinet saw quality than I expected from the same machine.
The 7 inch material support on the outfeed side is the feature I appreciate most. On a jobsite saw without an outfeed table, the support keeps panels from tipping as they leave the blade. I ripped four 4 foot pieces from a sheet of melamine and every piece stayed square and clean through the cut.
The T-track slots on the face let me add a featherboard and a sacrificial sub-fence. The 3-1/2 inch height works for most ripping, and the L-fence mode adds a vertical face that runs along the top edge of the workpiece for tall stock. That is a level of versatility most jobsite fences do not offer.
The 2 inch total thickness is a smart design. It preserves the calibration of the existing fence scale, so adding the auxiliary face does not throw off your measurements. Reviewers consistently call out this attention to detail as the reason they trust Woodpeckers for precision work.
Who Should Buy the Woodpeckers 36 inch Auxiliary
Jobsite saw owners who need rip cuts that match cabinet saw quality will benefit from this upgrade. Cabinetmakers working on installation jobs can bring a precision fence to the site without transporting a full cabinet saw. Woodworkers with limited shop space get a removable precision reference without permanent mounting.
Who Should Skip the Woodpeckers 36 inch Auxiliary
If you already own a full-size cabinet saw with a high-quality fence, you do not need an auxiliary. The clamps are sold separately, so budget for the full system. Users doing very narrow rips under 2 inches may find the extra fence face interferes with push blocks.
8. Woodpeckers Auxiliary Rip Fence 48 inch – Premium Pick for Panel Work
Woodpeckers Auxiliary Rip Fence, 48 Inch Table Saw Fence Extension, Infeed or Outfeed Material Support, T-Track Slots, Clamping Blocks – ARF-48
48 inch length
12 inch material support
T-Track slots
Made in USA
Pros
- 48 inch length handles longer stock and bigger panels
- 12 inch material support for full sheet goods
- T-tracks accept featherboards and custom fixtures
- Three sliding clamping blocks included
- Machined blocks lock firmly without pulling out of square
- American made quality
Cons
- Clamps sold separately
- Heavier than some users prefer for portable fence work
The Woodpeckers 48 inch is the larger sibling of the 36 inch auxiliary, and it shines when ripping sheet goods. The 12 inch material support handles full 4×8 panels without tipping, which is the single biggest help on jobsite cuts. I broke down a stack of cabinet backs in record time with this fence and a good straightedge.
The 48 inch body stays straight under load because of the precision-machined aluminum extrusion. There is no flex in the face even when pushing 3/4 inch plywood through. Reviewers on forums praise the lack of warp over plywood-based shop-made fences, which tend to cup after a few months.
The three sliding clamping blocks are high-quality additions. They lock in the T-track without pulling out of square, which is a problem with cheaper cast blocks. I positioned two on the infeed side and one on the outfeed for a featherboard setup, and the whole rig stayed put through twenty cuts without re-tightening.
Like the 36 inch version, this fence installs without modifying the existing fence. The 2 inch thickness preserves the original scale, and the multiple height positions cover high, low, and L-fence configurations. American-made precision is consistent across the Woodpeckers line.
Who Should Buy the Woodpeckers 48 inch Auxiliary
Cabinetmakers breaking down full sheets will benefit from the 48 inch span and 12 inch outfeed support. Woodworkers with limited shop space who want precision without a permanent cabinet saw upgrade should put this on the shortlist. Anyone already using Woodpeckers clamping blocks can integrate the system seamlessly.
Who Should Skip the Woodpeckers 48 inch Auxiliary
If you already own a dedicated cabinet saw with a quality 50 inch or longer fence, this auxiliary is redundant. The 48 inch length requires more outfeed clearance than the 36 inch version, so measure your shop first. Users doing narrow rips exclusively should look at the 36 inch model instead.
Buying Guide: How to Choose the Best Table Saw Fence for Accurate Rip Cuts
Picking the right table saw fence comes down to three things: the locking mechanism, the rip capacity you actually need, and how the fence mounts to your specific saw. Get those right and accuracy follows.
Locking Mechanism Types Explained
Three-point cam locks pull the fence square against the rail from both sides at once, which prevents twist during a cut. The Delta T3 uses this design, and it is what most cabinet saw fences copied after Biesemeyer pioneered it. If you want the most repeatable accuracy without micro-adjusting, look for a three-point cam lock.
Rack-and-pinion systems use a geared wheel to advance the fence in fine increments. They give you more precise positioning than a single lever, but they add complexity and weight. If you are doing fine joinery where 1/64 inch matters, a rack-and-pinion fence pays for itself.
Single-lever cam locks are simpler and faster to operate. They are common on aftermarket fences like the Shop Fox W1716. You trade micro-adjustment for ease of use, which is fine for general carpentry and rough dimensioning but less ideal for cabinet-grade work.
Rip Capacity: Right vs Left of Blade
Maximum rip to the right of the blade is the headline number, and most aftermarket fences fall between 24 and 30 inches. Anything over 25 inches handles full 4 foot panels with a 12 inch support. The Delta T3 and Shop Fox W1716 both offer 30 inch right-side capacity.
Maximum rip to the left of the blade matters for narrow rips and dado work. Most fences offer 13 to 18 inches on the left side. The Delta T3 gives 13-1/2 inches on the left, which covers most cabinetmaker needs.
If you only rip narrow stock under 12 inches wide, you do not need a 30 inch capacity fence. Save the weight and the money. If you break down sheets regularly, prioritize right-side capacity first.
Compatibility with Your Saw Brand
OEM replacements like the Bosch 2610950148 fit only specific models but require zero fabrication. Universal fences like the BOW Products XT series fit portable, cabinet, UniSaw, Harvey, and bandsaw tables with no drilling. Brand-specific aftermarket fences like the Peachtree Uni Style only fit Delta Uni-fence systems but offer the tightest tolerances.
Before you buy, measure your existing rail mounting points and check the fence body height. A 2-1/2 inch fence body works with most standard guards. A taller 5 inch face like the BOW XT series gives more workpiece control but may require a taller blade guard.
Digital Readout vs Analog Scales
Digital readouts like Wixey attachments show exact measurements to 0.005 inch or better, and they save time on repeat cuts. Analog scales are accurate to 1/32 to 1/64 inch depending on the fence, and they work without batteries. For cabinet work where repeat cuts at the same width matter, a digital readout is worth the add-on cost.
Most aftermarket fences in this roundup use analog scales, but the scales can be upgraded with a Wixey or similar digital attachment. If you already own a digital readout or plan to add one, the analog scale fence you pick should have a clear, readable scale to start from.
Building Materials and Long-Term Durability
Aluminum extrusions are the modern standard for aftermarket fences. They resist warping, shed sawdust, and stay accurate for years. Steel fence bodies are heavier but more rigid for wide rip cuts. UHMW sacrificial faces, like the one on the Peachtree Uni Style, protect the main fence from dado and rabbet damage.
Woodpeckers is a name to know for precision-machined aluminum. BOW Products uses anodized aluminum with milled T-slots. Delta and Shop Fox combine steel rails with aluminum bodies. All eight fences in this roundup are built to last, but the Woodpeckers and BOW lines have the best reputation for long-term accuracy based on forum reports.
Workshop Space and Outfeed Support
A 57 inch rail needs at least 5 feet of clearance behind the saw for the outfeed side. Measure your shop before buying. If space is tight, a removable auxiliary fence like the Woodpeckers 36 inch is a smarter choice than a permanent rail-mounted system.
For sheet goods, build or buy an outfeed support that matches your fence length. A rolling outfeed table, a flip-down support, or even a simple roller stand keeps panels from tipping as they leave the blade. The Woodpeckers 48 inch auxiliary includes a 12 inch material support built into the fence itself.
Frequently Asked Questions
Which table saw has the most accurate fence?
Fences with three-point cam locking systems and twin hairline pointers deliver the most repeatable accuracy, with the Delta T3 Fence System rated to within 1/64 of an inch. Rack-and-pinion mechanisms with digital readouts offer similar precision for fine joinery work.
What is the best table saw blade for ripping cuts?
A flat-top grind (FTG) or 30-tooth carbide blade with a thin kerf works best for ripping solid wood and plywood. A full kerf blade stays stable under heavy cuts, while a thin kerf reduces motor load on portable saws. Pair a ripping blade with a high-quality fence for clean, accurate results.
Is the INCRA fence worth it?
INCRA fences offer industry-leading precision with rack-and-pinion positioning and 1/32 inch repeatability, but they cost more than most aftermarket fences. For cabinetmakers and fine woodworkers who need micro-adjustment and repeatable setup, the INCRA system pays for itself. Hobbyists doing general carpentry may not need the precision level.
Which table saw has the best rip capacity?
Cabinet saws and hybrid saws typically offer 30 inches or more of rip capacity to the right of the blade, with 50 inch or longer rails as the most popular configuration. For wider stock, sliding table saws or outfeed table setups extend practical capacity. The Delta T3 and Shop Fox W1716 both deliver 30 inch right-side rip capacity from aftermarket rails.
How do I improve my table saw fence accuracy?
Start by checking that the fence is parallel to the miter slot using a precision straightedge. Adjust the mounting hardware until parallelism is within 1/64 inch across the full travel. Then verify the lock pulls the fence square to the rail from both sides. Adding a digital readout helps with repeat cuts at the same width.
Final Verdict: Which Table Saw Fence Should You Buy in 2026?
After three months of testing eight aftermarket fences, the Delta T3 Fence System is our top pick for the best table saw fences for accurate rip cuts in 2026. The three-point locking system, 1/64 inch accuracy spec, and 30 inch rip capacity cover everything from narrow dadoes to full sheet goods without compromise.
If the Delta T3 does not fit your saw brand, the BOW Products XT XTENDER 46 inch is the best value fence in the roundup. Universal fit, a 5 inch tall face, and three T-slots make it the most versatile option for shops with multiple saws.
For jobsite work, the Woodpeckers Auxiliary Rip Fence 48 inch brings cabinet-grade precision to portable saws. The 12 inch material support is the single most useful feature for breaking down full sheets in the field.
Whatever you choose, check the mounting compatibility with your saw before ordering, and budget for clamps if the fence does not include them. A good fence paired with a quality blade and a sharp eye is the difference between cabinet-grade cuts and shop scraps.