8 Best Infrared Patio Heaters for Wind-Resistant Heat (September 2026)

Yes, infrared patio heaters absolutely work in windy conditions. Unlike traditional propane or convection heaters that warm the air around them, infrared heaters use electromagnetic radiation to heat people, furniture, and surfaces directly. Wind blows right through the infrared beam without carrying the heat away, which is exactly why so many homeowners and restaurants in breezy climates have switched to infrared outdoor heating over the last few years.

Our team spent weeks evaluating infrared patio heaters specifically for wind resistance. We looked at how each unit holds up when gusts pick up, how quickly heat reaches you after switching on, and whether the build quality can handle real outdoor conditions season after season. What we found is that not all infrared heaters perform equally when the wind blows, and the differences come down to heating element type, mounting options, and weatherproof ratings.

This guide covers the best infrared patio heaters for wind-resistant heat available right now. Whether you have an exposed deck on the coast, a breezy backyard patio, or a partially covered porch that catches crosswinds, these picks will keep you warm when the temperature drops and the wind picks up.

Top 3 Picks for Best Infrared Patio Heaters

Best Infrared Patio Heaters for Wind-Resistant Heat in 2026

1. Infratech WD-6024 BL – Most Powerful Dual Element Heater

The Infratech WD-6024 is the most powerful heater on this list and the one I would trust in the toughest wind conditions. At 6,000 watts with dual heating elements spread across a 61-inch housing, this unit throws out serious heat that wind simply cannot disrupt. The radiant heat travels in direct lines from both elements to anyone sitting in the coverage zone, so even steady 15 to 20 mph gusts do not carry the warmth away.

What sets Infratech apart from every other brand here is the build quality. The housing is made from 304 stainless steel, the same material used in commercial kitchen equipment and marine hardware. That means salt air, rain, and UV exposure will not degrade this unit the way they do cheaper aluminum models. Reddit users in coastal areas consistently mention Infratech as the brand that survives multiple seasons without issues.

I appreciate that Infratech backs this heater with a three-year warranty and manufactures it in the United States. Most infrared heaters in this category offer only one year of coverage, so the extra protection tells you something about how confident the company is in the product. The dual element design also means you get more even heat distribution across a wider area compared to single-element units.

The trade-off is straightforward: you need a licensed electrician to install this. It runs on a 240-volt circuit with a 25-amp draw, which means a dedicated breaker and proper wiring. This is not a plug-and-play heater. But if you are building out a permanent outdoor living space and want heating that will not let you down when the wind howls, the Infratech WD-6024 is the gold standard.

Installation Requirements

Plan for a 240-volt dedicated circuit with a 25-amp breaker. The heater must be hardwired by a licensed electrician, and you will need at least 8 inches of clearance from the ceiling and 24 inches from any adjacent walls. Infratech recommends a minimum mounting height of 8 feet for wall installations and 10 feet for ceiling mounts to ensure safe and effective heat distribution.

Wiring runs can add to the total cost, especially if your electrical panel is far from the patio. Budget for the electrician visit on top of the heater itself. The unit is compatible with Infratech duplex stack switches and custom control panels, which let you adjust heat output across multiple zones if you install more than one.

Best Coverage Setup

For maximum wind resistance, mount this heater on a wall or ceiling facing the primary seating area. The 61-inch length means a single unit can cover a long sectional sofa or a row of chairs at a dining table. If you have a large patio, consider installing two units at overlapping angles. This creates a heat zone where even strong crosswinds cannot find a gap to blow through.

The directional bracket lets you angle the heat precisely. Point it slightly downward from a wall mount to keep the infrared beam focused on the seating area rather than scattering into open air. This targeting is exactly what makes the Infratech so effective in windy conditions.

2. Bromic Tungsten Smart Heat 2000W – Premium Build and Design

The Bromic Tungsten Smart Heat sits in the premium tier of infrared patio heaters, and you can feel the difference the moment you unbox it. The stainless steel housing has a high-temperature ceramic coating that resists corrosion and gives the unit a clean, industrial look that works well in modern outdoor spaces. Bromic is one of the brands that real restaurant owners and architects specify when they need reliable outdoor heating.

At 2,000 watts with a single quartz element, the Tungsten produces comfortable heat within about a 6-foot radius. That is smaller coverage than the Infratech, but the heat quality feels excellent on the skin. The quartz element reaches full temperature quickly, and the infrared warmth penetrates without that drying sensation you get from some carbon elements. I found it perfect for a conversation seating area with four to six chairs arranged closely together.

Where the Bromic really shines is versatility. You can wall-mount it, ceiling-mount it, or flush-mount it into a soffit for a completely clean look. The adjustable directional bracket lets you tilt the unit to target specific areas, which is critical in windy spots because you want to aim the infrared beam directly at where people sit rather than letting it scatter.

The main drawback is the add-on cost. The Smart Heat name means it is compatible with Bromic smart control systems, but the remote and controller are sold separately. If you want the smart home integration and dimming capability, expect to spend more on top of the base unit. Still, for the build quality alone, this heater earns its place as a top pick for anyone who wants equipment that looks as good as it performs.

Smart Home Integration

The Bromic Tungsten works with the Bromic Heating Wi-Fi controller (sold separately) which connects to your home network. Once paired, you can control on/off and heat levels through the Bromic app or integrate it with Alexa and Google Home for voice commands. This is genuinely useful if your heater is mounted high on a wall or ceiling where reaching a physical switch is inconvenient.

Without the controller, you are limited to a hardwired switch on the wall. Many users install a standard Decora switch, which works fine but gives you only on/off control. The dimming and scheduling features require the smart controller, so factor that into your budget if remote operation matters to you.

Long-Term Durability

Bromic customer service gets consistently high marks from owners. Several users report that Bromic sent replacement parts quickly when issues arose, even outside the standard warranty window. The stainless steel body holds up well in most climates, though a few coastal users mention the black finish can fade after extended sun and salt exposure.

To extend the life of the finish, consider using a protective cover during the off-season or when not in use for extended periods. The quartz heating element itself is rated for thousands of hours of operation, and replacements are readily available through Bromic directly.

3. Dr. Infrared Heater Carbon with Tripod – Best Value Versatility

The Dr. Infrared Heater Carbon with Tripod is the best value pick on this list because it gives you genuine wind-resistant infrared heating at a fraction of what premium brands charge. This heater uses a carbon infrared radiant element that produces instant, odorless heat the second you turn it on. No waiting for warm-up, no fan noise, and no propane smell. Just point it and feel the warmth.

What I like most about this unit is the flexibility. It comes with an adjustable aluminum tripod stand that lets you position the heater anywhere on your patio, but you also get wall-mounting hardware if you want a permanent installation. The IP55 rating means it can handle rain and dust without damage, which is important if you leave it set up on an uncovered patio.

The three power settings are a practical feature. On low (900W), you get gentle background warmth for cool evenings. On medium (1200W), it handles normal fall temperatures comfortably. On high (1500W), you feel serious heat that penetrates through light wind. Having this range means you can dial in the right amount of warmth without wasting electricity on nights when you only need a little boost.

The remote control is a nice touch, and the timer function lets you set it and forget it before going inside. Tip-over protection shuts the unit off automatically if it gets knocked past 60 degrees, which is essential on a windy patio where gusts can catch the tripod. Nearly 6,000 reviews with a 4.3 rating tells you this heater works reliably for a lot of people.

Tripod Stability in Wind

The included tripod works well for most situations, but on very windy days you may want to add weight to the base for extra stability. Some users attach sandbags to the tripod legs or place the setup in a sheltered corner. The tip-over protection adds peace of mind, but keeping the heater upright in the first place is always better than relying on the safety shutoff.

If your patio gets consistent strong winds, consider using the wall-mount option instead of the tripod. Wall-mounted infrared heaters are inherently immune to tip-over, and you can angle the heat beam down toward your seating area. This gives you the best of both worlds: wind resistance from infrared technology plus physical stability from a fixed mount.

Best Placement for Maximum Heat

Position this heater so it faces your seating area directly. Carbon infrared is highly directional, meaning the heat travels in a beam from the element to whatever is in front of it. Unlike convection heaters that warm general air space, you need a clear line of sight between the heating element and the people you want to keep warm.

For a patio table setup, place the heater about 6 to 8 feet away at an angle that covers all chairs. For a lounging area, position it at head height pointing slightly downward. Avoid placing it behind objects or glass partitions, as these will block the infrared beam and create cold spots.

4. Dr. Infrared Heater Portable Wall/Ceiling Mount – Budget Wall Mount

This is the wall-mount sibling of the Dr. Infrared Heater lineup, and it is one of the most affordable ways to get a permanently mounted infrared heater on your patio. At just 8 pounds and measuring only 35 by 8 by 4 inches, it is a slim unit that tucks against a wall or under a soffit almost unnoticed. The mirror aluminum reflector behind the carbon element achieves 90 percent reflectivity, which means almost all the infrared energy is directed forward toward your seating area instead of being lost to the housing.

I like this heater for covered patios and porches where wind is a factor but not extreme. Because it mounts to a fixed surface, there is zero risk of tip-over no matter how hard it blows. The IP55 rating handles rain splash and dust, and the weatherproof aluminum construction will not rust. It runs on a standard 120-volt outlet, so no electrician needed for installation.

The lack of a thermostat is the main trade-off here. You get three power settings (900W, 1200W, 1500W) controlled by remote, but the heater will not automatically regulate temperature based on ambient conditions. This is common in this price range, and most users find the three manual settings adequate for adjusting warmth. The silent operation is a real benefit, especially on a quiet evening when you want to enjoy conversation without fan noise.

With nearly 6,000 reviews and the same 4.3 rating as the tripod version, this heater has a proven track record. It uses the same carbon infrared element technology, which means the same instant, odorless heat that works well in breezy conditions. For anyone wanting to get started with infrared patio heating without spending much, this is the one to get.

Mounting Options and Placement

The included bracket lets you mount this heater to a wall or ceiling. For wind resistance, wall mounting is the better choice because you can angle the infrared beam downward toward seated guests. Ceiling mounting works well under covered patios where cross-breeze is the main wind concern. Aim for a mounting height of 7 to 8 feet so the heat reaches people at seating level.

Installation requires just a few screws and a drill. Having a second person to hold the unit while you secure it makes the job much easier, since the bracket design does not have a simple hook-on mechanism. Once mounted, the angle is adjustable, so you can fine-tune the direction after installation.

Heat Distribution Pattern

The mirror aluminum reflector creates a focused infrared beam that spreads in a cone pattern from the element. At 8 feet of distance, you get a heated area roughly 6 feet wide. That is sufficient for a small seating group but will not cover a large patio on its own. For bigger spaces, consider installing two units at different angles to create overlapping heat zones.

The heat feels strongest directly in the beam center and falls off toward the edges. Position chairs so people sit within the central zone for the best experience. If someone sits outside the beam, they will feel noticeably less warmth regardless of the power setting.

5. Nfccra 34-inch Dual Carbon Tower – Best Compact Tower

The Nfccra 34-inch tower heater earned the highest customer rating of all the heaters we reviewed at 4.4 stars. It uses dual carbon infrared heating tubes stacked vertically in a slim tower design, which gives you heat from your feet all the way up through your body. Most infrared heaters are horizontal units that only warm whatever is directly in their line of sight, so this vertical coverage is a meaningful difference.

Three heat levels (600W, 900W, 1500W) let you scale the warmth to match conditions. I found the low setting surprisingly effective for mild fall evenings, while the high setting pushes through light wind without trouble. The 1-second heat-up claim is legitimate: the dual carbon tubes glow and start radiating warmth almost the instant you press the power button.

The three-year warranty is the longest of any heater in this lineup, and it signals that Nfccra stands behind their product. UL certification adds another layer of confidence, confirming that the electrical components meet independent safety standards. At just 7.5 pounds with a built-in carrying handle, this heater is easy to move around the patio or bring inside when the season ends.

The IPX5 waterproof rating means it can handle rain and water splashes from any direction. That said, I would still bring it inside during heavy storms or cover it when not in use. The tower design is more vulnerable to wind than wall-mounted units, so for very exposed patios, consider placing this heater in a corner or beside a railing to reduce wind exposure on the unit itself.

Weatherproofing for Year-Round Use

IPX5 means the heater can withstand water jets from a 6.3mm nozzle from any direction. In practical terms, this handles rain, sprinklers, and splashes without damage. However, IPX ratings cover water only, not dust or debris, so if your patio gets dusty or sandy, you may want to keep the heater covered when not in use.

The aluminum alloy frame resists corrosion, and the flame-retardant 6.6-foot power cord adds a safety margin for outdoor placement. If you plan to use this heater through winter, make sure the outlet is GFCI-protected, which is standard practice for any outdoor electrical device.

Energy Efficiency vs Propane

Running this 1500W heater costs roughly one-tenth of what a comparable propane heater costs per hour of use. Electricity rates vary by region, but at the national average, you are looking at about 20 to 25 cents per hour on the highest setting. A propane heater burning at 46,000 BTU costs closer to $2.50 per hour in propane, and much of that heat blows away in the wind.

The efficiency advantage gets even bigger when you factor in wind. Propane heaters lose a significant portion of their heat output to wind carrying warm air away. Infrared heaters like this Nfccra unit lose almost nothing to wind because the heat travels directly to you rather than trying to warm the surrounding air.

6. Haimmy 42-inch Infrared Tower Heater – Most Heat Settings

The Haimmy 42-inch tower heater offers more granular heat control than any other heater on this list. Nine heat levels ranging from 620W up to 1500W let you dial in exactly the right amount of warmth. Most competitors offer only two or three settings, so having nine makes a real difference when you want precise comfort control on a breezy evening that keeps shifting between cool and cold.

The 42-inch height means the infrared heat starts at foot level and covers your whole body. At 8.8 pounds, it is light enough to carry from the garage to the patio in one hand. The safety lock feature is a thoughtful addition for families with young children or pets who might press buttons on the control panel. You set a code, and the heater will not respond to random presses.

The 1-to-9 hour timer is more flexible than the simple 2-hour timer on many competing models. You can set it for exactly how long you plan to sit outside and trust that it will shut off automatically. Combined with the remote control, you rarely need to walk over to the heater during use.

Durability is the concern I have to flag. Several users report the heating element failing after relatively short use periods. With 654 reviews and a 4.2 rating, most units clearly work well, but the failure rate appears higher than premium brands. If you choose this heater, test it thoroughly when you receive it and register for any available warranty coverage immediately.

Safety Features for Families

The combination of tip-over auto shutoff, overheat protection, and the child safety lock makes this one of the safest tower heaters available. If a gust of wind knocks it over, the heater cuts power instantly. The overheat sensor prevents the unit from reaching dangerous internal temperatures. And the safety lock stops curious kids from cranking the heat to maximum when you are not watching.

These features matter more than most people realize. Windy conditions create specific risks for freestanding heaters, and having multiple layers of protection is better than relying on any single safety mechanism. The IPX5 rating also means rain will not create electrical hazards during operation.

Best Use Cases for Tower Design

Tower heaters work best on patios where you have a flat, level surface and can position the unit within 6 feet of where people sit. They are ideal for small gatherings around a table or fire pit where everyone faces the same direction. The vertical heat coverage means guests feel warmth from their feet up, which is more comfortable than a wall-mounted heater that only warms one side of your body.

For windy areas, place the tower in a sheltered corner or next to a half-wall. The taller profile catches more wind than shorter or wall-mounted units, so shielding it from direct gusts helps with both stability and heating performance. If your patio is completely exposed with no wind breaks, a wall-mounted infrared heater will serve you better.

7. Paraheeter 3-in-1 Electric Infrared Heater – Most Mounting Options

The Paraheeter 3-in-1 earns its name by giving you three distinct installation options right out of the box: wall mount, ceiling mount, or freestanding tripod. This flexibility is rare at this price point, where most heaters force you to choose between mounting styles before you buy. With this unit, you can start with the tripod for portable use, then switch to a permanent wall mount later if you decide you prefer a fixed setup.

The IP65 rating is the highest weatherproof rating among all the heaters in this roundup. That 6 means complete dust protection, and the 5 means water jets from any direction will not cause damage. For patios that face heavy rain or coastal spray, this is the rating you want. It gives you confidence that the heater will survive real outdoor conditions without needing a cover after every use.

CSA certification is another point in its favor. This independent testing confirms the heater meets North American safety standards for electrical products. The 10,000-hour heating element lifespan means this unit should last for many seasons of regular use before the element needs replacement.

The main weakness is the control scheme. You get only two heat levels (high and low) with no timer function. That is a step backward compared to competitors offering three settings plus timers. The angle adjustment on the mounting bracket also leaves something to be desired, as it does not hold position as firmly as I would like. And while the tripod is a nice inclusion, it is not the most stable base in windy conditions.

IP65 Weatherproofing Explained

IP ratings use two digits to describe protection level. The first digit (6) indicates complete protection against dust and solid particles. The second digit (5) indicates protection against water jets from any direction. IP65 is significantly better than IP54 or IP55 for outdoor use because dust infiltration is what often causes electrical failures in heaters over time.

In practical terms, this heater can handle rainstorms, sprinkler overspray, and dusty environments without degradation. You still should not submerge it or aim a pressure washer at it, but normal outdoor exposure is well within its design parameters. This makes it a strong choice for uncovered patios and decks in regions with unpredictable weather.

Tripod vs Wall Mount for Wind

For windy patios, the wall-mount configuration is clearly the better choice. The tripod stand works fine on calm days, but its wide but lightweight design means a strong gust can topple the unit despite the tip-over shutoff. Wall mounting eliminates this risk entirely and gives you a fixed heat source that stays aimed exactly where you want it.

If you do use the tripod, place the heater against a wall or railing to block direct wind. The carbon infrared element still delivers heat effectively even in breezy conditions, but keeping the physical unit stable should be your first priority with any freestanding heater in wind.

8. ThermoMate 3000W Carbon Fiber – Best High-Power Wall Mount

The ThermoMate 3000W is the sweet spot between the affordable 1500W plug-in heaters and the premium 6000W Infratech. At 3,000 watts with dual heat modes, it produces enough warmth to cover about 120 square feet, which is enough for a good-sized patio conversation area. The carbon fiber heating element reaches full output in roughly 3 seconds, so there is no waiting around for the heat to build up.

This heater occupies an interesting middle ground in the market. It costs significantly less than the Bromic or Infratech, yet it delivers more than double the wattage of the 1500W budget models. For homeowners who want serious heating power without entering premium-brand pricing territory, the ThermoMate is a compelling option.

The 24-hour timer is one of the most flexible scheduling tools I have seen on an infrared heater. You can program it to turn on before your morning coffee on the patio or shut off after you go to bed without remembering to hit the switch. The remote control handles all settings, and the IP54 rating means it is protected against dust and water splashes.

The catch is the installation requirement. Like the Infratech and Bromic, this heater requires 240-volt hardwiring with a dedicated circuit. You cannot just plug it into a standard outlet. Several users mention the included instructions are vague, so having an electrician who understands infrared heater installations will save you frustration. Once properly installed, though, the ThermoMate delivers reliable, powerful heat that wind cannot easily disrupt.

Hardwired vs Plug-In Considerations

Hardwired 240V heaters like the ThermoMate deliver significantly more power than 120V plug-in models. A standard 120V outlet on a 15-amp circuit maxes out at about 1,800 watts, which is why most plug-in infrared heaters top out at 1,500W. By moving to 240V, the ThermoMate can deliver 3,000W, effectively doubling the heat output of a plug-in unit.

The trade-off is installation cost and permanence. You need an electrician to run a 240V circuit with a 12.5-amp breaker, plus conduit and wire rated for the amperage. This adds cost upfront but gives you a permanent, professional-grade installation that is safer and more reliable than running extension cords to plug-in heaters.

Coverage Area Optimization

At 3,000 watts, this heater covers about 100 square feet outdoors or 130 square feet in an enclosed or semi-enclosed space. For wind resistance, mount it on the upwind wall of your patio so the infrared beam travels with the wind rather than against it. This orientation keeps the heat on your seating area even when gusts push across the patio.

The adjustable mounting bracket lets you angle the heat up to 45 degrees, which gives you good control over the coverage zone. For a rectangular patio, mount the heater on the long wall and angle it across the width. For a square space, ceiling mounting with a downward angle provides the most even coverage.

How to Choose the Best Infrared Patio Heater for Wind

Picking the right infrared patio heater comes down to understanding how much heat you need, where you will mount it, and what your electrical setup can support. Here is what actually matters when you are choosing a heater for a windy outdoor space.

Why Infrared Beats Traditional Heaters in Wind

Traditional propane and gas patio heaters warm the air around them. When wind blows through, it carries that warmed air away and replaces it with cold air, forcing the heater to start over. This is why propane heaters struggle so badly in breezy conditions, and why their flames can blow out entirely in strong gusts.

Infrared heaters work completely differently. They emit electromagnetic radiation in the infrared spectrum, which travels in straight lines from the heating element to solid objects. When the infrared beam hits your skin, clothes, or patio furniture, the energy is absorbed and converted to heat. Wind passes right through the infrared beam without absorbing or deflecting it because air is largely transparent to infrared radiation. This is the fundamental reason infrared patio heaters are wind-resistant by design.

Wattage and Heat Output: What You Need

More watts means more heat, but the relationship is not linear because of how infrared works. A 1,500W heater provides comfortable warmth within about a 6 to 8 foot radius. A 3,000W heater roughly doubles that coverage to 100 to 130 square feet. A 6,000W heater like the Infratech covers even more with its dual-element spread.

For a small patio seating area of four to six chairs, 1,500W is adequate if the heater is positioned correctly. For larger spaces or open areas with significant wind exposure, step up to 3,000W or higher. The key is matching the wattage to your actual space rather than overbuying, since higher-wattage heaters require 240V circuits and professional installation.

IP Ratings Explained for Outdoor Heaters

IP stands for Ingress Protection, and the two-digit rating tells you how well the heater is sealed against the elements. The first digit rates dust protection on a scale of 0 to 6, where 6 is completely dust-tight. The second digit rates water protection on a scale of 0 to 9, where 4 means splashing water, 5 means water jets, and 6 means powerful water jets.

For outdoor infrared heaters, you want at least IP54 for basic weather protection. IP55 is better because it handles rain and water jets. IP65 is excellent because it adds complete dust sealing on top of water jet protection. The Paraheeter with its IP65 rating offers the best environmental sealing of any heater in this guide.

Mounting Options for Wind Resistance

Wall-mounted and ceiling-mounted heaters are inherently more wind-resistant than freestanding units because they cannot be knocked over by gusts. If wind resistance is your primary concern, choose a wall or ceiling mount. This is consistent with what we heard from Reddit users in windy areas who overwhelmingly prefer mounted units.

Tripod and freestanding heaters offer portability but require attention to stability. Look for units with tip-over protection, and consider adding weight to the base or placing the heater in a sheltered spot. The Dr. Infrared Heater with Tripod includes tip-over shutoff, but physically preventing tip-over is always better than relying on the safety switch.

Safety Features That Matter

Tip-over auto shutoff is essential for any freestanding heater. It cuts power if the unit is knocked past a certain angle, preventing fire hazards. Overheat protection shuts the heater down if internal temperatures exceed safe limits. Both features should be considered non-negotiable for outdoor use.

For families with children, the Haimmy safety lock feature adds an extra layer of protection. CSA or UL certification confirms the heater has been tested by an independent lab and meets established safety standards. ETL certification from ThermoMate and Intertek serves the same purpose.

Installation: Plug-In vs Hardwired

Plug-in heaters running on 120V are the easiest to set up. You can take them out of the box, plug them into any standard outdoor outlet, and start using them immediately. They max out at 1,500W due to the limitations of a 15-amp circuit, which is enough for small to medium patios.

Hardwired heaters running on 240V require professional installation but deliver significantly more power. If you are building a new patio or remodeling, running a 240V circuit during construction is relatively inexpensive compared to adding one later. For existing patios, the electrician cost is the main barrier, but the heating performance difference is substantial once installed.

Frequently Asked Questions

Final Thoughts on Wind-Resistant Infrared Patio Heaters

Finding the best infrared patio heaters for wind-resistant heat comes down to matching power to your space and choosing a mounting style that handles your wind conditions. The Infratech WD-6024 BL is the top performer for serious wind exposure with its 6,000W dual-element design and commercial-grade stainless steel build. The Bromic Tungsten Smart Heat delivers premium quality and smart home integration for those who want it. And the Dr. Infrared Heater Carbon offers outstanding value with flexible mounting options at a fraction of the premium-brand cost.

For most homeowners, a 1500W wall-mounted infrared heater placed correctly will handle breezy patios well. For exposed coastal or hilltop locations, stepping up to a 240V hardwired model is worth the installation investment. Whatever you choose, remember that infrared heat works by direct line of sight, so position your heater where it faces your seating area with minimal obstructions between the element and where people sit.

With any of these heaters on your patio, you can extend your outdoor season well into the cooler months without worrying about wind ruining your comfort. Here is to warm evenings outside, regardless of the breeze.